Silk screen printing Dip tank.
Dip tank Manufactured by Sunlight stencils from stainless steel
The Dip tank is supplied complete with spill tray, lid and drain tap..
The internal area large enough to take 8 35″ x 25″ frames .
The integrated hold down bar slides in any position..
Minimal space required to install, vital for any silk screen printing studio.
Increase production with less chemical usage, very cost effective to any silk screen printer novice or proffesional.
overall dimensions are. 45″ x 26.5″ x 21.
How to use Dip tank
Stand Dip tank on top of dip tray
Fill tank with water 200mm from top of hold down bar ledge.
Add 12lt of reclaiming liquid and mix thoroughly.
Alace up to 8 large screens in the tank and pull the hold down bar across the top.
Allow screens to soak for 5 minutes. then remove them.
Rinse off both sides do not allow the reclaiming liquid to dry on the screens.
spray wash with a pressure washer.
PLACE LID ON DIP TANK.
Screen reclaiming method of choice
Dip tank, is becoming he screen reclaiming method of choice in the uk, and attracting more interest in Europe. But why?
You just soak your screens in the dip tank with chemicals of your choice ; right? With the increasing interest in this screen reclaim technique, we ask more and more about this process.
Dip tanks allow an all-in-one cleaner , stencil remover or just screen wash to soften the stencil,remove ink or bothe t at the same time, freeing you up to rinse and clean another screen whilst it is in the Dip tank.
Before consider purchasing your first dip tank, think about the enviroment, the world is full of plastic . All POLYPROPERLENE CHEMICAL RESISTANT DIP TANKS ARE NOT BIO DEGRADABLE. Stainless steel are recyclable and do not rust unlike galvanised Dip tank. Common misunderstandings of this stencil reclaim process: For busy workshops they save time and money. This can be true while the chemicals are fresh and new, however, over time as the chemistry strength weakens , you may need to start physically brushing the screens to get them clean. You may also use a larger volume of chemicals in a working condition. In reality you are unlikely to save time and money unless you are cleaning between 20 and 30 screens per day. You will also need to consider the costs involved in disposing of the dip tank chemicals and solids once the working solution is no longer functional.
Dip times should be for 1 to 3 minutes, or until the stencil just starts to break away from the mesh. The screens removed and washed down .Topping up the dip tank with solution will increase its strength. Because if the screens are left in the tank for too long and all the ink or stencil becomes dissolved in the solution. The build-up of ink and Chemical solids reduces the functionality of the active components in the chemistry.
“Are the chemicals in the Dip tank drain safe!”
You must not assume that a product labelled ‘Drain Safe’ . can actually be poured down the drain. Drain safe means the product does not knowingly contain any chemicals that are banned from entering the waste water system; this is not the same as compliance. With all dip tank chemistry, It is your responsibility to find this out and to operate accordingly Seek approval from your water authority for a consent to discharge to the drains.