Sale!

Cheap Screen Printing Essentials Union plastisol ink.

£15.00 £11.00

UNION INK EF MAXOPAKE GOLDEN YELLOW PLASTISOL SCREEN PRINT INK

Cheap Screen Printinig Union ink.

They can be used on all White or coloured cotton/cotton polyester blended Textiles
This rangeof inks are creamy in texture to allow hand printing through meshes from a 34T to a 62T.
Maxopake however can be produced using “print flash print” to give nice bright opaque printed colours onto dark garments.

Instructions:

Dark garments. Direct printing. 100% cotton or cotton/polyester.

Stencils: Use any direct emulsion or capillary film compatible with plastisol inks.

Additives: Maxopake inks are supplied ready to print.

If necessary to reduce viscosity, use up to 15% by weight, of Reducer.

For printing transfers, mix Maxopake with with 5-10% Hot Split Additive (PLUE-9040).

Printing Instructions: Multiple strokes may be required when printing by hand.

When printing with automatic presses use a slightly rounded squeegee to print a thicker ink layer.

A soft pad on the printing pallet will minimize penetration into the garment and improve opacity.

Curing Instructions: These inks will fully cure when the entire thickness of the ink deposit reaches 149°C.

The full colour range from Union ink will be listed in the new year.

Price 500g @ £6.00.

[email protected] £11.00.

[email protected] £42.00

 

 

 

 

10 in stock

Description

Cheap Screen Printing Supplies UK. Union plastisol ink.

Cheap Screen Printing Essentials. We are the market-leading supplier of high opacity plastisol inks in the UK.

Our plastisol white inks gives the screen printers of any size the widest range of options to print on any substrate.

Choose from a wide range of White inks ‘

designed to meet your exacting demands for specific substrates or that can work across many different substrates.

Our specialty Inks comprise a wide range of bases, barrier products, 4C process, and numerous special effect products.

Cheap Screen Printing Supplies UK. offers a wide palette of ready to use plastisol color inks in stock and available readily.

Union Colors come in four different series.

Cheap Screen Printing Essentials.

Furthermore special viscosity modifiers and additives were formulated to work with Union screen print inks.

Mixing systems  allow the textile screen printer to adjust our inks to meet specific application needs.

Furthermore our colour mixing systems are known in the market.

Cheap Screen Printing Supplies UK.

PADE – Maxopake plastisol with high opacity used for direct printing.

PATE – Athletic Gloss plastisol ink for Nylon athletic uniforms.

PLUE – Ultrasoft Plastisol that is versatile, for easy direct printing and for transfers.

ATHP – Polyester Low Bleed Plastisol with high Opacity for 100% Polyester athletic uniforms.

Plastisol inks are widely used in garment printing.

They are easy to print, do not dry in the screen, can be very opaque on dark garments, and will adhere to most textiles.

They are composed primarily of two ingredients, PVC resin (a white powder) and plasticizer (a thick, clear liquid).

Plastisol inks have one outstanding characteristic, they must be heated to dry.

They will not dry, or cure, at normal temperatures.

For a complete cure, they must reach 143-166º C.

Plastisol inks can be printed on virtually any surface that can withstand the heat required to cure.

The ink and is porous enough to permit good ink penetration.

Plastisol inks do not color the fibers like a dye. Instead the ink wraps around the fibers and makes a mechanical bond with the fabric.

For this reason, they will not adhere to non-porous substrates such as plastic, metal, and glass.

They also will not adhere well to woven, waterproofed nylon material without adding a bonding agent.

Cheap Screen Printing Essentials.

Plastisol inks are innocuous when used with reasonable care.

A true plastisol ink contains no air-polluting solvents or volatile organic compounds.

The manufacture, transportation, storage, use, and disposal of plastisol inks do not cause  environmental contamination ,

As long as the appropriate safety and environmental protection procedures are followed.

Cheap Screen Printing Essentials

Mesh Selection

With over 400 different meshes to choose from, selecting the correct mesh can be a frustrating process.

Use the following information as a general guideline for mesh selection.

  • Use 12 threads per centimeter for printing glitter inks.
  •  24 threads per centimeter for athletic printing, opaque ink deposits, thick puff ink, and shimmer ink.
  • 34 threads per centimeter for heavy coverage on dark shirts, solid underbase prints, puff, metallic, and shimmer inks, and transfer printing.
  • 4 9 threads per centimeter for general printing on dark shirts, underbase prints with detail, prints on dark nylon jackets, and silver shimmer ink.
  • 71 threads per centimeter for multi-color printing on light shirts, light colored nylon jackets.
  • 90 threads per centimeter for detailed multi-color printing on light shirts, light nylon jackets, over printing on dark shirts.
  • 120 threads per centimeter for process color on light shirts, overprinting on dark shirts.

When printing fleece goods use 20 threads lower. When printing with an automatic press use 30 threads higher.

This information was developed by Scott Fresener of the US Screen Printing Institute.

Emulsion Selection
For plastisol inks use solvent-resistant dual-cure or diazo direct emulsion stencils specifically designed for plastisols .

Capillary film stencils are also a good choice, particularly when printing halftones and transfers.

Plastisol Ink Additives

A word of caution about ink additives.

It’s easy to upset the chemical balance of plastisol inks by using the wrong additives or by adding too much of the correct additive.

The result can be a print that never cures properly, a problem that may not be discovered until your customer washes a shirt and the design falls off.

To avoid this problem use only those additives recommended by Union Ink, read the Technical Data Sheets for each ink and additive, and carefully follow their instructions.

Never add mineral spirits to plastisol ink.

Although mineral spirits will make it easier to print at first, soon the ink will become even stiffer and harder to print than before.

Also, it is possible that mineral spirits will prevent the ink from curing properly.

Ink Storage

Store plastisol inks at room temperature. Prolonged exposure to temperatures above 90º F (32º C) can cause the ink to start to cure while it’s still in the container.

Screen Washup
Clean plastisol ink off your screens with either mineral spirits or any of the various brand name screen washes available from your screen printing supplier.

Controlling Dye Migration
Dye migration is the problem caused by dyes in polyester fibers transferring to and changing the color of plastisol inks.

The colors most likely to migrate are red, maroon, kelly green, and some of the darker blues.

Dye migration may appear immediately after the ink is cured, or hours, days, or up to two weeks later.

To control dye migration use the following procedures:

  • Print with high-opacity, low-bleed inks.
  • Use no more heat than necessary to cure the ink. More heat means more dye migration.
  • Print and flash-cure a low-bleed white underbase, then print the desired color over that.
  • Avoid the problem by printing on 100% cotton fabrics.

Print Washability
The washability of properly cured direct and transfer prints is excellent. Dry cleaning is not recommended. Do not iron the printed part of the garment.

Cheap Screen Printing Essentials

Curing Plastisol Inks

Curing plastisol inks is a matter of exposing them to the proper amount of heat for the correct length of time.

Correct curing of plastisol ink is extremely important.

The most common problem encountered with plastisol inks is poor washability.

In almost every case, this is due to incomplete ink cure.

When plastisol is heated, the resin particles absorb the surrounding liquid plasticizer .

swell, merge with each other and form a tough, elastic film.

It is generally impossible to overcure direct prints because the overcure temperature is above the scorching point of the garment.

However, it is not recommended that you heat the ink layer above 350º F (176º C).

Above this temperature puff inks fall like a cake .

When you slam the oven door, and problems with dye migration are greatly increased.

If the entire thickness of the ink is not brought to the correct curing temperature the ink will be under-cured .

The resin has not absorbed all of the plasticizer and the ink will crack and flake off the garment when washed.

Cheap Screen Printing Essentials

Temperature

Plastisol will start to become dry to the touch or gelled (also called semi-cured) between 82-121º C.

It becomes fully cured between 138-160º C, depending on the type of plastisol.

The temperature at which the ink becomes fully cured is called the fusion temperature.

Most Union Ink plastisol inks cure at 149º C.

Check the Technical Data Sheet for each Union Ink plastisol for complete instructions.

Measuring Ink Temperature
Temperature test strips are useful for determining temperatures of the printed ink film.

For thick prints, a temperature tape should be placed inside the garment to make sure the proper temperature is achieved at the bottom of the ink film.

Temperature probes and infrared thermometers (pyrometers) can also be used.

Although they are extremely precise at measuring temperature.

Hence may give erroneous ink film temperature readings if not used correctly because the probe may not react quickly enough to changes in the ink film temperature.

Cheap Screen Printing Essentials

Time
Once the entire ink film thickness reaches the proper temperature, the ink is fully cured.

This means that with a high enough temperature in the curing unit, the plastisol could actually be cured in a few seconds.

Testing a Direct Print for Cure
The definitive test to determine if plastisol inks are cured is a wash test.

Generally it will take from 5-10 washings to fully test the cure, but if the ink is seriously undercured, the print will show deterioration after only 1-3 washings.

There are two other tests commonly used to check ink cure.

The most popular test is to stretch the print about 2/3 of the total stretch of the T-shirt.

If the print cracks badly and does not retract when the fabric is released, the ink is probably under-cured.

The stretch test does not always work on thick deposits of ink,

Such as with on athletic jerseys, where the top layer of ink may stretch but the ink deep down in the fabric may be under-cured.

Another test for curing can be done by placing a few drops of ethyl acetate onto the back of the ink on the inside of the garment.

This spot of ink is then placed onto an area of unprinted garment and burnished or held tightly together for two minutes.

If there is a transfer of ink to the unprinted area, the ink is not fully cured and the garment should be run through the dryer again.

Like the stretch test, this test is not always accurate. Ethyl acetate is a fairly hazardous chemical.

If the ink is undercured, you can run it through the dryer again and complete the cure.

Cheap Screen Printing Essentials

Adjusting Your Dryer

It’s very important to understand how to adjust your dryer to achieve the correct curing temperature.

It is a common misconception that you need to measure the temperature of the dryer.

Actually, you must be able to determine the temperature of the ink film.

The temperature of the ink film is determined by the time the garment is under the heater and the temperature of the heater.

This means that the temperature can be controlled with the belt speed of a conveyor dryer or time under the heater with a flash curing unit.

If the heater temperature in a dryer or flash curing unit reaches 427º C.

It is possible for the ink film on the garment to reach the full cure temperature  149º C in a matter of 20-30 seconds.

Generally the temperature in the dryer is much higher than the temperature required to cure the ink. This allows the ink to cure quicker for faster printing.

Cheap Screen Printing Supplies UK

Flash Curing
Plastisol can generally be fully cured with a flash cure unit if the heater is set to the highest temperature and the unit is placed 2-3 inches (5-7.6 cm) over the garment for 20-30 seconds. For curing between colors where only a partial cure is required, the time can be less.

Conveyor Curing
As a starting point, the temperature of heaters should be set at full on. If the heaters are allowed to cycle on and off there may be too long an off cycle for the dryer to maintain the proper temperature consistently. The belt speed should be set so the garments are in the tunnel 20-30 seconds. Small dryers may require a much slower belt speed than larger dryers. From this starting point, you will have to print sample garments and wash test them to determine the correct belt speed and temperature settings for your dryer for the various types of jobs you print.

Important Curing Tips

  • White ink requires the longest cure time of any standard color. Light ink colors require longer curing periods than dark colors.
  • Thick ink layers require longer curing periods than thin layers.
  • Glitter, shimmer, reflectivem, and metallic inks require longer curing periods.
  • Because the pigments used in these inks tend to reflect infrared radiation (heat).
  • Prints (both on paper and garments) should be cured within a minute of printing.
  • If you delay curing, the plasticizer in the ink may start to leach out of the ink into the substrate.
  • This will look like an oily margin around the print.
  • Temperature tapes are not exact.
  • They can vary as much as 10-20º F (5-10º C) and should be used only as a guide.
  • The definitive test is how well the print launders.
  • Dryer temperatures can vary greatly with just minor changes in belt speed, garment loading, room temperature, air movement, or fluctuations in incoming voltage.

Cheap Screen Printing Essentials

Plastisol Transfer Printing
Most plastisol heat transfers fall into one of three categories, hot-split, cold-peel, or puff.

When hot-split transfers are applied, the paper is stripped off the garment immediately after the heat transfer press is opened.

The ink layer splits, leaving part of the ink on the garment and part on the transfer paper.

Hot-split transfers are nearly indistinguishable from a soft-hand direct print.

When cold-peel transfers are applied, the transfer is allowed to cool before the paper is removed.

All of the ink transfers from the paper to the garment.

Cold-peel transfers have a glossy surface and are preferred for glitter and athletic transfers

. Some transfers can be either hot-split or cold-peel.

Puff transfers are printed with special puff transfer inks and when properly applied, produce a puff design.

Transfers that have been properly printed and applied are as durable as a direct print.

Cheap Screen Printing Essentials

Curing Transfer Prints
When printing heat transfers, the ink is only gelled or brought to a semi-cure.

This occurs between82-121º C, just past the wet state.

Transfers that have been semi-cured become fully cured when they are applied to the garment.

If they are over-cured, the ink will not transfer well.

Testing for Cure
To determine the correct dryer settings for gelling the ink.

Increase the conveyor speed, or decrease the temperature of the curing unit until the stacked prints begin to stick together or show a slight amount of set-off on the back of the upper sheet.

Then decrease the conveyor speed enough to eliminate the sticking.

Another test for gel (though not always accurate) is to peel the ink off the release paper and roll it into a ball.

If the ball unrolls when laid down, the transfer is overcured.

A third test is the stretch test.

The gelled ink layer should be cured just enough that you can peel it off the paper, but if you try to stretch it, it should break with very little stretch.

Cheap Screen Printing Essentials

Hot-Split Transfer Tips
For medium-opacity transfers use Ultrasoft (PLUS), or AutoLine (AUTO) ink.

For high-opacity transfers use Mix-Opake (MIXO) with Mixo-Trans Additive or Transopake (TROP).

Print through an 86 thread/inch (34 thread/cm) mesh.

Cure to 121º C.

See below for curing procedures.

Use Super-Trans, TransLith, or Trans 55 paper, available from Union Ink.

Transfer to the garment at 177º C for 10-15 seconds at 1.75-2.1 kgf/cm2.

Peel the paper off the garment immediately after the press is opened.

Cheap Screen Printing Essentials

Cold-Peel Transfer Tips
Use the same inks, mesh, and curing procedures as for hot-split transfers.

Use TransFrench T-75, Super-Trans, or TransLith paper, available from Union Ink.

Transfer to the garment at 177º C for 10-20 seconds at 1.75-2.1 kgf/cm2.

Allow the transfer to cool completely before stripping off the paper.

Glitter Transfer Tips
For glitter transfers, use Super Glitter (PAGL-S) printed through a 30 thread/inch (12 thread/cm) mesh.

Cure as for hot-split transfers.

You can use TransFrench T-75 or TransLith papers, but for the highest gloss transfers, use a high-gloss transfer paper such as Warren O Duplex paper.

Glitter transfers are generally applied using the cold-peel procedure.

Cheap Screen Printing Essentials

Puff Transfer Tips
For puff transfers, use Transpuff (TRPF) ink printed through a 60 thread/inch (25 thread/cm) mesh.

Print a very thick layer of ink onto Trans-55 paper.

After printing the transfer, apply a transfer adhesive powder.

such as Union’s Unilon Heat Transfer Powder (ULON), either by sprinkling the powder over the print, or by passing the transfer through a tray containing the transfer adhesive powder.

Curing puff transfers is very critical.

The ink should be cured enough that it does not smear or offset in the stack, but not enough to puff.

The temperature window for curing puff transfers is 82-93º C. pply the transfer at 190º C for 5-10 seconds at 2.1-2.8 kgf/cm2).

Remove the paper from the garment immediately after opening the transfer press.

Cheap Screen Printing Essentials

Testing for Transferability
It is essential that you test your heat transfers for transferability at the start of each production run.

his is particularly important when using a new paper or ink.

You should also do accelerated aging tests which will indicate how well the transfer will release after 6-12 months on the shelf.

Accelerated aging tests can be done by placing the printed transfer in an environment of(49º C for 100 hours.

This will simulate approximately one year of shelf storage. While this test does not exactly duplicate the effects of aging, it will definitely help you determine whether a particular transfer will release well after aging.

 Screen Printing Supplies UK

Always Test Inks Before Using In Production
Always test inks to determine their fitness for your particular applications, particularly new types of inks and when printing on new products.

Before printing a production run, print a sample for testing for adhesion, crocking, opacity, washability and any specific job requirements.

Ready to ship in 3-5 business day from United Kingdom (UK)


Reviews

There are no reviews yet.

Be the first to review “Cheap Screen Printing Essentials Union plastisol ink.”

Vendor Information

  • Store Name: www.sunlightstencils.com
  • Vendor: www.sunlightstencils.com
  • Address: Greenway
    Hollywood lane
    Seven oaks
    KENT
    TN156JG
  • No ratings found yet!
Sale! -17%
Sale! -7%