Creative Blog

We love writing about anything and your comments gives us motivation and new ideas.
Bid for a home.

Bid for a home . Hull City Council

Bid for a home. Hull City Council.

Bid for a home in Hull using  Home search.

How to bid

You need to be registered on our housing list (Homesearch) to bid for properties.

More information on registering for Homesearch

You can bid for properties –

  • online with your Homesearch reference number to log on
  • by email to hull.homesearch@hullcc.gov.uk
    Include your application reference number, your name, date of birth and the details of the properties (reference numbers and addresses) you want to bid for
  • by text 07795 563 000 you must start with bid (followed by a space) and provide your housing application reference number, name and the property references of the properties you wish to bid on
  • in person at one of our customer service centres. You can also place your bids online using public computers in the customer service centres and libraries
    Find your nearest customer service centre
  • by telephoning 01482 300 300

Our online bidding page is currently showing a different format to usual but you are still able to bid using this page. You need to scroll down to the bottom of the page to log on as normal.

How to access. Bid for a home. Hull Home search

We advise you to connect to Housing Self Service using Internet Explorer. The first time you access this there may be a delay. You may experience ongoing problems via Google Chrome or Firefox.

 

Number of bids .

Bid for a home.Home search

The number of bids you can make in each advert depends on which priority band you are in. If you are in band –

  •   A or B you can make up to three bids
  •   C, D or E you can make up to two bids

If you bid for a property that is not owned by us you are agreeing for us to share your details with the landlord of that property (the property advert will state who the landlord is).

Weekly adverts. Bid for a home. Hull Home search

Adverts are published weekly on a Thursday morning and bidding closes the following Monday at 5pm. This may change across public holidays or when we need to carry out essential system maintenance.

We expect a high volume of people using the website on Thursdays when bidding opens. If you have any problems placing bids on Thursdays please be aware that it is not a first come first served process and you have until bidding closes to place your bids.

Access our list of available properties to bid for

You need to scroll to the bottom of the page and select browse all available properties.

Choosing your bids & refusing offers

It is very important that you choose your bids carefully and only bid for properties that you are eligible for and would accept if offered.

If you refuse two offers of accommodation within a six month period your housing application will be frozen for six months.

You will not be able to bid whilst your application is frozen.

Property information

We provide basic property information and where possible a photograph of the property available for bidding.

We do not give the exact address because the property may still have a tenant living in it or have works being carried out to it.

You must not ask the tenant, their neighbours or any operatives who may be at the property if you can look around the property.

You will be invited to view the property if you are the successful bidder.

Eligibility criteria

These are the rules we have about who we consider for different property types.

We do not consider bids you make for properties you are not eligible for so please bid carefully.

Find out more about our property eligibility criteria

Placing a bid

When bidding is open there are three search icons at the bottom of the page

To bid for a property you must add it to your basket.

Once you have added all of your bids to your basket you need to confirm them or they are not  placed.

Make sure you allow enough time to place your bids before the 5pm deadline.

Any bids received after the deadline will not be considered.

Assisted bidding

If you are not able to bid yourself and do not have anyone to help you we offer an assisted bidding service.

We agree with you in advance the areas and property types you would like to be considered for and bid on your behalf when a matching property is advertised.

After bidding has closed

We will cotact the successful bidder as soon as possible after bidding closes (usually within a couple of days).

You should assume you have not been successful if you do not hear anything from us after bidding has closed.

Find out about what happens when you are the successful bidder 

You can apply for a home through our Homesearch Scheme. To register on our housing list you need to complete an application form and provide proof of your circumstances. Once the form has been processed you can bid for properties (bidding does not involve any money, you are just showing your interest in a property).

How to register

You must fill in a Homesearch application form and provide all of the relevant documentary evidence (proof) of your circumstances.  The application form tells you what we need proof of. You must make sure you provide all the proofs we need. If we do not receive all of the proofs we may not be able to process your application or award you the correct priority for your circumstances.

 

 

Alternatively you can collect a form from one of our customer service centres or information points.

Find your nearest customer service centre or information point

Who can be on our housing list

ONE You must be 16 or over to apply to be on our housing list.

TWO You may not be eligible if –

  • you are from abroad (even if you’re a British Citizen)
  • have been found guilty of unacceptable behaviour and we believe this makes you unsuitable to be a council tenant

If we decide you cannot be added to our housing list, or we disqualify you from it, we notify you and tell you how to appeal if you do not agree with our decision.

Find out more about our allocations policy

 What happens next

Once your application has been registered we write to you with –

  • your reference number (also called your bidding number)
  • the level of priority you have been awarded
  • what your household type is (for example if you are a single person or a family with one child, and so on)

This information determines the type of properties you can be considered for and how likely you are to be offered one, so you must check it carefully and contact us if you do not think it is correct. When you have received this you can start bidding.

Other housing options

There is high demand for our homes so we are unable to offer everyone on our housing list a property. You may wish to consider other housing options such as private rented accommodation or housing associations.

Changes in your circumstances

Once you are registered on the housing list it is your responsibility to inform us if any of your household circumstances change.  You should also make sure we always have your up to date contact details so that we can contact you if you are being considered for an offer of a property.  Failure to advise us of any changes in youor circumstances could result in us not being able to make you an offer of a property.

If you would like to know how much benefit you may be able to receive or help with budgeting, visit our benefit calcular and budgeting tools

sell online for free now

Sell free online advertise your website today

                  Advertise your website. Sell free online with bid all hours.

  1. What is the best way to sell for free online?  Leave me a comment your url, i will advertise your website here for free.

    sell free online is one of the absolute best ways to turn your loyal audience into a consistent revenue stream. In fact, many of my customers set out to start their shops specifically for the purpose of marketing and selling.

    Sell online for free.

    I will discuss how to use  BIDALLHOURS to sell products. Whether you are selling an existing product of your own or you are using your hub to sell.  Products for a 3rd party company in exchange for a referral fee. I recommend that all sellers have some kind of product offering.

    Stop overlooking the money making potential of using your shop to sell free online .Read on to learn about how simple it can be.

    The Keys to Selling Products for free Online  Audience and Conversion Rate

    The two biggest factors in how successful you can be with offering products to sell free online. The size of your audience you are able to convert into paying customers (also referred to as your conversion rate). First, we will discuss how easy growing your audience can be.

    Building Your Audience Means More Potential Customers

    Building a bigger audience is something that every seller should be focused on at all times.The best way to build your audience is through quality content that adds real value to your customers.  Creating content that is easily shared among people always helps expand the potential visibility of your website.

    When you grow the audience of people who regularly read your blog, you also are growing your potential customer base. The more eyes that you are able to get on your blog, the more potential purchases you will be able to drive. Besides growing your audience, you should also be mindful of the percentage of them you are turning into customers.

    Increase Your Conversion Rates by Keeping It Relevant

    Increasing window shoppers that you convert into purchasers  is to present,real value proposition with what you are selling. Even if you create engaging, shareable content .That your shoppers love.if you cant sell free online its almost surefire route to failure.

    Launch a website that gives your buyers advice or recommendations. Find a way to drive your customers towards the products or service that you recommend.  This makes your sales pitch seamless. Much more likely that your buyers will take you up on it.

    Selling Your Own Products direct from your website: Turning window shoppers Into Customers

    Manysellers already have a product that they are looking to sell. This could be something as simple as selling an e-book , or perhaps selling your time as a consultant or other type of expert within your field.

    Take a step back to sell free online

    I have seen many sellers get overzealous when selling products .They own themselves, to the point that they neglect to sell free online.Their products that are intended to draw their customers in. My advice is to never lose sight of what brings your window shoppers to you in the first place: excellent content.

    The best advertising for any product is to give your potential customers a taste of what you have to offer. And there is no better way to do this then in showing your expertise. Using the best marketplace platform for selling online for free  and make available for everyone to see. If you forget this point, you might find that you lose them,  before you  to turn them into customers!

    sell free online

    To convince a customer to pay you for a product or for your time, show them a clear example. explain how this will make their life easier or more fulfilling is an absolute necessity.

    Like it or not, we all encounter dozens of advertising messages each day. Because of this, most people train themselves to filter and ignore empty sales pitches that overpromise and underdeliver.

    The good news is that you make a well founded case for why customers should purchase what you are offering. I recommend avoiding trying to come up with the perfect sales pitch, and instead making yourself as relatable as possible. People are more likely to buy from a trusted source, so authenticity is absolutely vital.

    sell free online

    Pointing your readers towards selling for free  somewhere else can be extremely lucrative. Typically the company refer customers who will give you a fee, in exchange for referring the customer to them. Best of all, you do not have to worry about taking on any of the risk in terms of holding the products.

    Commissions vary quite a bit depending if you can sell for free.  I always recommend reviewing options, so that you can be sure you are going with the most competitive option available. Most e-commerce sites will pay more for affiliates who send them the most customers, so I recommend not getting discouraged if you are not seeing really high conversions in the beginning.

    FINALLY

    In order to sell as many products as possible. I  recommend narrowing your focus to goods and services that you can sell online for free . One great way to do this is to partner with a major online marketplace, such as bidallhours.

    Bidallhours check this out websites to sell items online for free:

    Advertise your website for free.

    Sell online for free.

    Auction online for free.

    SEO for free.

    Traffic for free.

    1st page google ranking for free

    £20 note AK 47                                              1st page google.  Because we gie you full opimisation     About 121,000,000 results .   websites to sell items online for free

    LUXURY SPORTS BRAND T-SHIRTS    1st page google.   Because we gie you full opimisation     About 399,000,000 results   websites to sell items online for free

    Pencil Drawing by Cecil Riley.                    1st page google.  Because we gie you full opimisation   About 386,000             websites to sell items online for free

    bid cyprus property to buy                           1st page google.  Because we gie you full opimisation   About 16,100,000        websites to sell items online for free

    Spider man poster sell online                      1st page google.  Because we gie you full opimisation   About 22,100,000        sell items online for free

    Africa Hubs sell online                                  1st page google.  Because we gie you full opimisation   About 76,100,000     sell items online for free

    PAINTING by B.WARD                               1st page google.  Because we gie you full opimisation   About 26,100,000         sell items online for free

    CHINESE VASE EARLY 1800S                 1st page google.  Because we gie you full opimisation   About 4,700,000 results   Sell online for free.

    Aluminium printig screens pro quality    1st page google.  Because we gie you full opimisation   About 36,700,000 results  Sell online for free.

    Sell free online advertise your website today    rank 1st page google.  741700,000

    LEAVE A COMMENT AND I WILL ADVERTISE YOUR WEBSITE FOR FREE.

    LEAVE ME YOUR URL AND YOUR LOGO OR BANNER WITH YOUR EMAIL.

Cheapest Screen print supplies

Cheapest Screen print supplies uk and Equipment

 UK’s leading Screen Printing & Equipment supplies.

Advertise  your  Website here for just £10 per year  and sell online for free. Plus  1st page google.

A wide Choice of the Cheapest Screen print supplies, we have everything you need for the garment printing industry.

Where do you start to look for the  Cheapest Screen print supplies? First of all many people look for a basic list of the Cheapest Screen printing supplies and equipment. To over view the method of screen printing. Consequently  telling them the minimal tools and equipment they need as well as the basic steps  involved. We will break the process down and list the tools needed to start you off in screen printing. This will give you the most basic information to help you get started.

The first step is to create some artworkSilk Screen print supplies

 Most artwork is created using illustrator, Photoshop,coral draw free software like gimp and cad draw. vectors are best for illustrations (solid line work).
multi colour designs are separated and placed on separate layers from the original image.Then each colour is printed in black by itself. This colour sepiration is also known as film positive separation. a printer, Ink jet or Laser , a computer with software will be required with this step.

Creating the film positive from the Cheapest Screen Print Supplies on the planet

After your artwork is created or separated you will need to convert it all to black and print it on a clear film, this is your film positive.
Conseqquently if the artwork design has more than one colour ,you will need to print a film positive for each colour.

It is this black opaque film positive you are going to use to make your screen. this is the step you are going to require a computer, a printer and ink jet or Laser film.

Our customers can choose which Screen print supplies  from our webstore  for Screen making. 

You will need a screen to pass the ink through onto your shirt.

They are commonly known as Silkscreens, their are 3 types  that you can use.

Aluminium silkscreens, wooden silkscreens or precoated stencils.

Whrn you have decided which one to use, you will need to degrease it before you coat it with emulsion.

The precoated silkscreen and precoated stencil this has already been done.

The emulsion is a light sensitive liquid.

Which is coated on the mesh and dried, with a fan heater or oven.

Once it is dry, it is then exposed with the film positive under uv light in order to make a stencil.

This step will require screen making chemicals, a water hose and an exposure unit.

Furthermore another way to expose to uv light is using the sun. A sunlight precoated Aluminium screen or stencil sheet.

Basic list of Screen Printing Equipment to print fabric

1.LED UV Exposure unit. to make stencils using light sensitive emulsion on the silkscreen.
2.Wash out booth with water sprayer. To wash out and clear the image on the screen.
3.Drying oven or fan heater. To dry the silk screens after preparing them for emulsion or coating the with emulsion.

4.A darkroom, or subdued light room. for coating your screens and storing the coated silk screens for future use.
5.Screen printing press, jiffy clamps or silkscreen carousel. To print your t.shirts, Hoodies, fabric with ease and consistency.
6. Flash cure unit or heat gun. To flash dry between colours or to fully cure single colours
7. A Tunnel  conveyor dryer. To fully cure your print, water based ink at 185 deg c, plastisol ink at 155 deg c.
8. Washout booth and pressure washer. To reclaim  so you can reuse your screens.

SCREEN PRINTING ESSENTIALS.

9. Coating trough. To coat your silk screens with emulsion.
10. squeegee. wooden or aluminium , to push the ink through the silk screen.
11.Screens stretched with mesh. to make your stencils on and print your shirts.
12. Spatulas. To take the ink from the bucket and place on the screen. for removal of ink and back in the bucket.
13. Ruler and T square . To mark the mounting pallets to align artwork film and fabric positioning with a felt tip pen.
14. Heat reader. Infra red hand held temperature laser thermometer to check the curing temperature of the printed ink.
15. Spot cleaning gun. To remove unwanted marks of ink on the t.shirts and hoodies.
16. Scrub brushes. To apply degreaser to your screens and ghost paste remover.

Customers can buy these by far the Cheapest Screen print supplies in our webshop.

Furthermore  art2silkscreen has the perfect solution to all budding artist and designers.

The selection of professional quality  screen printing supplies offered at discount prices

Finally creations brought to life with our knowledge and experiance.

As a result our customers stay ahead of all the other silk screen printers in the marketplace.

Our Customer can advertise their website here. Furthermore sell free consequently make more profit

The seller informs his customers the generous discounts available, as a result returning happy customers.

The perfect purchase for any budding screen printer or an ideal birthday or Christmas present for artistic loved ones.

Our Silk Screen Printing  supplies. include excellent consumables needed to get printing your own designs at home.

Find out more about The Screen Print Specialists here .

SCREEN PRINTING SUPPLIES GB. THE ONE AND ONLY

Screen Printing Mesh ink machinery and more

Best screen printing supplies uk. Marketplace Online

As a leading supplier within the screen print sector, we endeavor to fulfill complete customer satisfaction at all times.

Property for sale in cyprus

Buy Cyprus properties FREE BUILDING PLOT

Buy property in Cyprus  direct from the developer. Off plan.

Leave me a comment your url, i will advertise your website here for free.

You can save up to 30% of the market value.

 Buy Cyprus properties  has never been easyer .Selling on bidallhours is a business for some and a lifestyle for others. There are businesses generating £1 million a month to businesses generating £1k a month. But, no matter what the sales, the main objective is profit – right?

A question that might often come to mind:

Buy Cyprus properties, Here’s how you can work it out

Buy Cyprus property   Take the total cost – commision fees, FBA cost, postage cost and VAT/sales tax = total profit generated from that sale.

Having a clear idea of profit margins on a product can lead to effective business decisions.

Before buying further stock in the future, you may question some costs and perhaps consider raising your RRP to increase profit.

Buying Cyprus property being said, once you have determined a profit.

Having all of this information in one hand could be extremely advantageous.

Helping to save time and make better business decisions. In turn, helping to grow your investment.

Where can I find all of this information in one dashboard?

Having  built-in features to help with both start-up and growing bidallhours  sellers.

 Property Features:

Real-time profit analytics and business intelligence dashboard: interactive charts and smart Profit and Loss table in the dashboard,

Exact calculation of Purchasing  Cyprus property costs, accounting for sellable.

Buy Cyprus property 100% accurate accounting, when you  Buy Cyprus property changing buying prices: specify your cost of goods by period and by batch,

Accounting   any feesby product ie.Buy Cyprus properties

Buying a house or flat off-plan means buying it before it’s been built.

This might sound risky, but in a market where property prices are on the up and more homes are needed, it can have its rewards.

That’s why the sight of homebuyers queuing around the block waiting for a show home to open is becoming more commonplace. Especially NEAR AYIA NAPA MARINA  developments.

BUY ANY TWO PROPERTIES AND RECEIVE A BUILDING PLOT  FREE .

Call now  +357 99 474 456.   find out how to claim your free building plot complete with planning permission.  Contact me for details   kyriacos@greenacrescyprus.com

 

Buy Cyprus property

Property for sale in Cyprus – the best place to search for Cypriot property.

The  number one property greenacresproject.com website. Stunning scenery, beautiful beaches and ancient ruins.

Cyprus is an island paradise in the Mediterranean Sea. With bespoke  villas, houses  for sale, you can find your dream holiday property in Cyprus.

Because greenacresproject.coms the best place to find the latest property in Cyprus.

Cyprus draws on a rich patchwork of cultures, having seen everything from Middle Eastern to Western European inhabitants over the last 9000 years.

This makes Cyprus a totally unique and distinctive country, and a wonderful place to live.

The third largest island in the Mediterranean Sea, Cyprus is home to a diverse range of landscapes and cities.

From the pine-clad Troodos Mountains in the island’s interior, to the bustling streets of Nicosia.

You can find property in Cyprus in some stunning locations.

Many people head to Cyprus for the classic spotless beaches and turquoise waters.

Resort towns such as Ayia Napa attract thousands of tourists looking to party into the night.

More sedate villages and towns are dotted right around the coast, with some superb property in Cyprus for sale.

All offer wonderfully historic surroundings. in some of the best towns in Cyprus.

All throughout the island you can find property near shaded vineyards, ancient monasteries, sandy beaches, citrus groves and castle ruins.

Cyprus is one of the most vivid locations in all the Med!

Buy Cyprus properties

Famagusta boasts to have the best beaches of Cyprus. The golden sandy beaches of the district gently embrace the eastern corner of the island.

The popular holiday resorts of Agia Napa and Paralimni have been called a veritable paradise for anyone who loves the sea and watersports.

The charming scenery includes the tiny fishing harbour of Agia Napa.

The mediaeval monastery at the heart of the village and the windmills and churches of Paralimni & Protaras.

This region is the main potato producing area on the island, and is known as ‘Kokkinochoria’, which means ‘red soil villages’.

The villages of this area are equally known for their folk poets, who are regarded as the best on the island.

Since March 19, 2014, residents of countries that are not members of the European Union.

Can obtain the citizenship of Cyprus for investment in unprecedented favorable conditions.

As the state is the EU member.Holders of its passports can enjoy all the advantages of the European Economic Area residents.

Furthermore the right to work, visa-free travel, etc.

Greenacre  project has been engaged in investment citizenship for more than 10 years.

Therefore our specialists team will help to arrange it in the most comfortable mode.

We will build real estate projects that can be bought for the Cyprus passport, as well as solve other issues.

Legislation of this country, unlike similar programs of other states, allows You to sell an investment asset after 3 years after receiving a passport.

Another plus is a large selection of investment options .Buy Cyprus properties, including government bonds and housing

sell or Advertise anything online everything from used or new.
We introduce manufacturers and retailers to the exciting world of ecommerce.  Establishing them on various existing online shopping sites or platforms.

Our online shopping sites are in Africa; the United Kingdom; Europe and the USA.
Our team of experts will make sure that your products are sold on the ecommerce platforms that best suit your products and your business, big or small.

Our online shopping websites .
Typically, our clients have no online presence before teaming up with us.

However, some of our biggest clients have their own online shopping platform but still seize the many opportunities we have to offer them.

Finally having  built in features to help with both start up and growing  sellers.  Bidallhours Can Advertise our customers  website here, sell online for free. Furthermore receive MORE TRAFFIC, resulting in more sales.

 

Royal College of Art

Royal College of Art Refashioning the Internet

Royal College of Art Gravity Sketch.

InnovationRCA launches First50 Scale-Up programme

To connect their start-ups with industry mentors and help them reach greater heights

The Royal College of Art’s centre for enterprise and entrepreneurship,

Innovation RCA, has reached a significant milestone on its journey, helping 82 graduates launch more than 50 spinouts.

These companies range from one producing a vegan leather alternative made from pineapple leaves,

To making clothes that expand as children grow and another producing concrete material available in a roll.

Collectively these companies have created more than 650 UK jobs and generated more than £87 million turnover in the last 10 years.
A number of InnovationRCA’s companies have either achieved the status of scale-up* or are very close to achieving this.

To help these companies reach the next level and create successful and sustainable British companies,

Innovation RCA has launched a new First50 Scale-Up programme

Which will pair InnovationRCA entrepreneurs with senior executives from industry to foster future heavyweight talent in innovation and disruption.

Innovation RCA director, Dr Nadia Danhash, said:

‘The First50 Scale-Up programme is about so much more than celebrating the achievements of our graduate companies.

It’s about recognising their potential to scale to even greater heights,

Create more jobs and exports, improve more people’s lives and change the world we live in.

We’ve been with them from day one and we will continue to stand with them.

Shoulder to shoulder and support them with this new scale-up programme.’

Royal College of Art Vice-Chancellor, Dr Paul Thompson, said:

‘We are so pleased to be launching the First50 Scale-Up programme of support

That says that the RCA is your partner for life and will continue to support you long after you’ve graduated.

We must give thanks to a number of senior executives from global and British large corporations

Having agreed to become scale-up business fellows.

Giving up their time to meet our founders and provide insights to help these companies grow.’

*The Organisation for Economic Co-operation and Development (OECD) definition of a scale-up

Which is a company that has 10 or more employees and is growing at a rate of 20% year on year for three years.
InnovationRCA’s Success Stories

IKAWA – Maker of the World’s First Digital Micro Coffee Roaster


Founded by Royal College of Art graduates Andrew Stordy and Rombout Frieling,

IKAWA, is a scaleup that’s created a micro-roasting system that is revolutionising the word of coffee for producers and consumers.

Designed and made in the UK and selling in over 70 countries,

The IKAWA vision is to change the coffee industry for the benefit of coffee growers as well as coffee drinkers,

By facilitating a rewarding trading relationship with smallholder coffee farmers and helping them improve their coffee quality.

Coffee enthusiasts order green, unroasted beans, which are then roasted at the push of a button and ground in an IKAWA Home Roaster.

Industry professionals can use the Pro Roaster to test new harvests and replicate these roasts when back in the office.

So simple, the whole family can use it. It’s powerful and its capability only grows with your curiosity.

ROLI – Creating new music-making devices for the digital age


Design-led music technology company ROLI, develops hardware and software products to make music creation more connected and accessible for everyone.

ROLI’s first product, the Seaboard, reimagined the piano keyboard as a soft touch-responsive, continuous surface combining the expressive capabilities of multiple instruments in one interface.

Founded at InnovationRCA, ROLI which grew out of RCA alum Roland Lamb’s graduation project, exports its products to over 40 countries.

Plumis – A fire detection and suppression company that produces Automist®, a simple, retrofittable, sprinkler-alternative that detects and puts out fires without soaking homes


Automist began as a student project at the Royal College of Art and was supported and backed by InnovationRCA.

This young company is winner of numerous international awards including the James Dyson Award and a Queen’s Award for Enterprise in Innovation – the UK’s highest accolade for business success – in recognition of outstanding innovative achievements by demonstrating commercial success through innovative products and Build It Awards 2016’s  Best Home Technology Product.

Automist has been installed in more than 3000 UK homes.

Concrete Canvas – Maker of Concrete Canvas, concrete on a roll


Concrete Canvas® is a flexible, concrete impregnated fabric that hardens on hydration to form a thin, durable, waterproof and fire-resistant concrete layer.

It prevents erosion control, containment and rapidly deployable hardened shelters.

Used in over 80 countries and employing more than 30 people.

Concrete Canvas was ranked the 16th fastest growing UK company by Sunday Times

Fast Track 100’ (2015) and won the Queen’s Award for Innovation in Enterprise in 2014.

Concrete Canvas grew out of Royal College of Art.

Graduates William Crawford and Peter Brewin’s project of rapidly deployable shelters for humanitarian disaster relief.

Loowatt – Maker of a waterless toilet and waste processing system that converts waste into fuel and fertiliser


Founder Virginia Gardiner created Loowatt while studying for her Masters in Industrial Design Engineering at the Royal College of Art.

In addition to installing over 100 household toilets in drought-stricken Madagascar, Loowatt also provides luxury ‘super loos.

Servicing music festivals and large-scale outdoor events in the UK, including the 2018 wedding of Meghan Markle and Prince Harry in Windsor, UK.

The Loowatt team is made up of designers, engineers, tech-experts and business people, all of whom are committed to creating a paradigm shift in sanitation.

The company has received several large awards from the Bill & Melinda Gates Foundation and Innovate UK and is backed by a number of investors.

Ananas Anam – Maker of the world’s first sustainable leather alternative: Piñatex®


Piñatex® is an innovative natural textile made from pineapple leaf fibre; the by-product of existing agriculture.

Using waste leaf fibres creates an additional income stream for farming communities in countries that need it most.

Piñatex® is a natural, sustainably-sourced, cruelty free material and is the first fabric to receive a “PETA-Approved Vegan” certification.

Ananas Anam Founder Dr Carmen Hijosa created Piñatex® while studying for a PhD in Textiles the Royal College of Art. Carmen is also a winner of InnovateUK’s Women in Innovation Awards 2016.

TG0 – Developer of a tactile interactive control technology


Almost all electronic product controls have the same limitation:

Bundles of on/off buttons that are rigid and uninspiring to use, expensive and complicated to manufacture.

TG0 produces controls that are simple and cheap to manufacture, ergonomic and friendlier to the environment.

Also TG0 is an award winning start-up creating a platform technology with a wide range of applications- from automotive interiors and consumer electronics to gaming consoles.

Furthermore TG0 was invented by Founder Ming Kong while he was studying Innovation Design Engineering at the Royal College of Art. The technology is patent pending.

Gravity Sketch – The company’s immersive 3D technology allows users to explore and communicate their ideas directly in 3D though AR and VR


An intuitive creation tool with a re-imagined user experience designed for mixed reality,

Gravity Sketch’s allows users to seamlessly export content in a variety of formats giving them the freedom to take design to the next phase.

Create 3D models, concept drafts, and work in a fast and intuitive way through the use of AR, VR, and Touch technologies

With Gravity Sketch there is no need to learn CAD, engineering vocabulary or cumbersome keyboard commands.

The Gravity Sketch team of Oluwaseyi Sosanya, Daniela Paredes Fuentes, Guillaume Couche and Pierre Paslier

Began working on the project whilst studying for their Masters in Innovation Design Engineering at the Royal College of Art.

ENDS

Please see images here.

If you would like further information or more images please contact

Kim Pham, RCA Press Office on t: +44 (0) 20 7590 4127, e: kim.pham@rca.ac.uk

Notes to Editors

About the Royal College of Art

The Royal College of Art, the internationally renowned art and design university,

Provides students with unrivalled opportunities to deliver art and design projects that transform the world.

A small, specialist and research-intensive postgraduate university based in the heart of London,

Furthermore the RCA is a high performing institution, a radical traditionalist in a fast paced world.

The RCA’s approach is founded on the premise that art, design creative thinking, science, engineering and technology.

Must all collaborate to solve today’s global challenges.

The University employs around 1000 professionals from around the world .

Professors, researchers, art and design practitioners, advisers and visiting lecturers.

Which to teach and develop students in 30 academic programmes.

Royal College of Art  students are exposed to new knowledge in a way that encourages them to experiment.

Working across scientific and technical canvases and beyond set boundaries, RCA students seek to solve real-world problems.

The RCA runs joint courses with Imperial College London and the Victoria & Albert Museum.

InnovationRCA, the university’s centre for enterprise, entrepreneurship, incubation and business support,

has helped over 50 RCA business ideas become a reality that has led to the creation of over 600 UK jobs.

Alumni include David Adjaye, Christopher Bailey, Monster Chetwynd, David Hockney.

Also Tracey Emin, Thomas Heatherwick, Lubaina Himid, Clare Waight Keller and Rose Wylie.

The RCA was named the world’s leading university of art and design in the QS World Rankings 2019 for the fifth consecutive year.

About Innovation Royal College of Art

InnovationRCA is the Royal College of Art’s centre for enterprise and entrepreneurship, helping students and graduates transform compelling ideas into successful businesses.

It provides start-up incubation services, to help exceptional graduate start-ups with  compelling ideas rapidly generate technological, market or commercial proof of concept and transform into profitable and investable businesses.
It also incubates and manages the commercialisation of intellectual property created by graduates  helping them secure licenses and bring their products to market

Bid for a property Kingston

Bid for a property Kingston South West London

How to bid for properties

Bid for a property Kingston South West London.

Once you are on the Housing Register you can ‘bid’ for council and housing association properties in the borough and in South West London (Croydon, Lambeth, Merton, Richmond upon Thames, Sutton and Wandsworth).

What is bidding? Bid for a property Kingston South West London

You tell us if there’s a property you would like to live in – this is called putting in a ‘bid’. It does not involve money – you simply put your name down as interested. We call it Choice Based Lettings as you can choose which homes you like rather than us matching you to homes.

When and where we advertise properties

We advertise properties each week from Wednesday to midnight on Sunday.

Furthermor we advertise on the Home Connections website.

The advert includes the street name, a photograph and things like the number of bedrooms, what floor it’s on, if there’s a lift, the mobility category – and the rent.

Bid online. Bid for a property Kingston South West London

You can bid for a property online using the Home Connections website.

You’ll need your User ID and PIN.

These are in the letter we sent you confirming you are on the Housing Register.

If you do not have them please contact us.

Also you can bid anytime from Wednesday (just after midnight on Tuesday) to midnight on Sunday.

The day or time you bid doesn’t affect the outcome.

And you can bid for as many suitable properties as you like.

There is also a mobile app availble for Android and Apple.

The Home Connections apphas a simple and straightforward interface makes searching, bidding, and managing your property bids easier than ever.

Find the Home Connections app on the Google Play Store and Apple App store.

Help for people who can’t bid online. Bid for a property Kingston South West London

If you find it difficult bidding, we can set up automatic bidding for you, known as Autobid.

You tell us which areas of the borough you’d like to live in (up to seven) and any other boroughs you’d like to live in that we have links with.

Bids are then automatically placed for any suitable homes that become available there.

We set up all homeless households in temporary accommodation and on the Housing Register with automatic bidding.

Home Bidding Thurrock

Bid for a home Thurrock. Finding somewhere to live

Finding somewhere to live

Bid for a home Thurrock. Home Bidding Thurrock.

Bidding for a council property

By ‘bid’ we simply mean to apply for a property by making an ‘expression of interest’.

We advertise council and housing association properties online each week.

Adverts show:

  • the property area
  • property type
  • number of bedrooms
  • who can bid

You can bid for the property of your choice.

Some applicants are given priority because they need to move urgently – bidding for certain properties may be restricted to them.

How to bid

You can read adverts and make an expression of interest for properties by logging in to our council housing services.

Council housing services online

Home Bidding Thurrock.The bidding cycle

The bidding cycle starts on a Thursday morning and ends at midnight on the following Monday.

It makes no difference when in the cycle you place your bid as bids are ranked according to priority.

You can check your position in the queue and change your bids at any time before midnight on the Monday.

You can only bid for up to 2 properties each week.

Some weeks there will be no properties for you to bid on.

This could be because:

  • there are no properties with the right number of bedrooms for your application type
  • your application is suspended as you have been shortlisted for another property
  • your application has been cancelled as you no longer qualify

The chance of your bid succeeding

The chance of your bid succeeding depends on a number of factors.

You may have to wait many years for a bid to be successful. When you bid for a property:

  • the system will tell you your current position in the queue of bidders for that property
  • your position may change as other people bid for the same property after you

We publish tables showing:

  • bids for properties that have been advertised
  • how long the successful bidders had been on the waiting list

You can see details of all the bids you have placed and your final queue position by logging in to our council housing services online and looking at your historic bids.

Bid for a home Thurrock  After you bid

Each Tuesday morning, after the time for bidding has closed, we start to shortlist applicants for properties according to their priority.

Just because you are the top bidder does not mean you will get the property.

Some people at the top of the list will not be successful because either the property is unsuitable for them or they don’t qualify.

Bid for a home Thurrock  Successful bidders

If your bid is in the top 6 of our successful shortlist for a property, we will call and send you a message asking for documents that prove that you qualify.

You must provide your documents within 2 working days, otherwise we will offer the property to someone else on the shortlist.

Original documents must be brought into our Civic Offices in New Road, Grays, where they will be scanned and returned to you.

Photocopies of documents will not be accepted.

Bid for a home Thurrock  Viewing

We will contact you to make an appointment for you to see the property with one of our estate officers.

Allthough there may be a delay before the appointment is made .

As for instance, if the property’s estimated availability date, as shown in the advert, is more than a week away.

Sometimes we will show more than 1 person around the property at the same time.

If this happens you will be told if you are bidder number 1, 2 or 3.

The property will always be offered to the number 1 bidder first, then to number 2, and so on.

Paying rent and moving in

If you are offered the property you must pay 4 weeks’ rent in advance.

You must make the payment using a debit or credit card when you look at the property.

The next bidder will be offered the property if you cannot pay at the time.

You may not have to pay the full 4 weeks’ rent in advance if you are already receiving housing benefit, or can show that you will be entitled to housing benefit.

Once you have paid the rent in advance you will be able to sign a tenancy agreement.

You will get the keys and can make arrangements to move into the property.

If you want to join the transfer list you will need to start a new application using the same application number and memorable date.

Only secure tenants can join the transfer list.

Bid for a home Thurrock

Apply to buy your home

The government’s Right to Buy: Own Your Home website describes how the scheme works.

You apply to buy your home by completing an application form either online or downloaded from the government’s website.

HM Government: Right to Buy application

We will write back to you within 4 weeks, or 8 weeks .

Which  if you have had tenancies with other landlords during your qualifying period.

As a result we will tell you if we approve your application, giving you an explanation if we do not approve it.

If you have the right to buy, we will arrange to have the property valued.

Then Finally we send you an offer of sale.

Which includes the price and some information about the service charges that you will have to pay once you buy.

We can guide you through the Right to Buy process.

Signed completed forms should be sent to the address below.

Enquiries can be sent to us by email.

Panther Dryers

Panther Dryers screen printing equipment

Panther Dryers

Panther Dryers , they have been aroung a long time.

Over priced uk made DINOSAURS ready for the scrap yard.

Value less  Scrap metal .

Do their Panther Dryers really offer value for money ?

The WPS Panther 700 Texitunnel is the most popular tunnel dryer in the UK a proven workhorse

Built to last:Highly efficient t-shirt dryer

Suitable for any small or medium size t-shirt printing company using mainly “plastisol” printing inks.

Good for t-shirts, sweatshirts, working clothes, umbrellas and many more substrates.

  • Suitable for curing (plastisol inks)  up to 500 garments per hour
  • Suitable for curing air drying waterbased inks up to 600 garments per hour
  • For heat cured water based inks 2 passes is required (100 – 150 garments per hour)

Panther Dryers  Specifications

Length  – Overall 2 metres  (Inlet 59cm / Tunnel 109cm / Outlet 33cm)

Width – Maximum with control box on the side 97cm / maxium with screen printing  control box on the top 92cm / Tunnel (outside) 77cm / Transportband 70cm and Heaters 51.5cm

Electrical – available as 1 or 3 phase (380 volts / KW (total) 7.4 kw / Average power use per phase per hour 1.6 kw / Max power requirements per phase 11 amps

Belt Speed in m/min – 0

First and for most  they claim  this Panther dryer cures 500 prints on t.shirts an hour.

T.shirts  small to xl are 30 inches long and 20- 24″ wide.  A3 size print is 12 x 17″ long.

The  Panther  tunnel on the 700 model is 42″ long and 36″ wide..

Most reputable screen printing supplies of Plastisol inks.

CURING recommended by unon ink
For optimum curing, we recommend that a minimum
ink film temperature of 300°F (149°C). This can typically
be achieved by a dwell time in the oven of at least 1
minute in the oven set at a temperature above 300°F.

LETS DO THE ARITHMATIC

T. Shirts layed flat for consistant even curing .

Lay 3 end to end equates to 90″.  1 min inside the oven to travel 42″.

To be very kind and genorous , 120 prints an hour.

What beggers belief where did they come up with the figure 500?

Sounds like a load of shoe repairers.

The price is over £3000. you might as well flush your money  down the toilet.

Panther Dryer belt motor

Made by a company that manufactures wiper motors.

These were fitted to the  Mcfurson tunnel dryers 40 years ago they kept leaking oil.

Consequently they went bust!

WPS still peddals these  PantherDryers with these fitted wiper motors.

WPS also went into administration  3 years ago owing customers  and suppliers money.

Finally the sums and the facts dont lie.

Panther Dryer More updates and horror stories.

Watch this space.

HI All,
We have a Panther tunnel dryer which we purchased from Wicked Print over two years ago, it was fine for the first 18 months but since then we are on a third motor to drive the belt, a new Thermocouple
we are having problems with it not curing everything and the heat dropping up and down, does anyone have one or had the same problems?

https://www.dyesubforum.co.uk

OK, let’s try and keep it civil folks 🙂 We don’t tolerate rudeness from anyone on here.

I can’t comment on the actual machine. As you’ll know, WPS have recently been bought out.

Unfortunately this was just after they sold me a load of kit, most of which went back.

Even the pallette knife had to go back as it was like tin foil!

Everything that was ‘acceptable’ arrived damaged.

So if this is an ad for WPS (and i don’t believe it is!) I’d be the first to say steer clear!

I appreciate they’ve been bought out but when I approached the new owners about the (frankly) crap flash heater they ‘mis-sold’ me.

I was simply told that it wasn’t there problem as they’d just taken over the business following liquidation.

Very kindly they offered me a discount on future purchases but that’ll never happen!

  • The Panther 700 Texitunnel Conveyor Dryer

    Dave Roper has announced that it is now the exclusive dealers in the UK for Panther Dryers, “Europe’s first specialist manufacturer of electric screen printing tunnel dryers.”

    The dryers are made in the UK entirely from European parts, explains the company, which also reports that the dryers are low maintenance “as long as they are kept clean and are well looked after”.

    According to Dave Roper, there are a number of advantages to using the Panther dryers with their ceramic elements, such as “less energy, a longer life, equal drying speed, and the T-shirt remaining at a cool temperature.”

    Dryers can be customised to customers’ own specifications, explains the company, adding: “The Panther Dryer will offer you complete control over drying your garments.”

    Texitunnel 700 Panther Dryer. This dryer is designed with just one bank of elements – it is good for drying t-shirts after screen printing.

    FULLY CURING 500 A3 PRINTS AN HOUR WHITE ON BLACK , METALIC ON BLACK PULL THE OTHER ONE DAVE.!!!

    • Last used March 2018. Extractor fan not working but otherwise fully operational
    • Elements and thermocouples have been periodically replaced. Belts replaced.
    • Serviced by Panther on several occaions.
    •  sold as seen.  “The Panther Dryer
    • as you can see, they do not hold any value.

    SISS: WPS 700L Tunnel Dryer

    According to SISS, the WPS 700L Tunnel Dryer is its most popular dryer, with the company adding, “It is the most versatile and capable dryer in the marketplace.”

    Built by SISS (WPS) in the UK, it is ideal for DTG printers, says the manufacturer, curing both light and dark garments. It can also be used with manual and semi-automatic screen printers using plastisol, as well as water-based and water-based discharge ink, which the company says will be cured in a single pass.

    The dryer comes as standard with variable belt speed, temperature controls and an element array that can be moved up and down as needed, allowing it to accommodate large substrates. It uses ceramic infrared elements, which SISS says are efficient and long-lasting.

    The standard length of the dryer is 3m and it comes with air extraction and either a 70cm or 90cm wide belt. It is available in either three-phase or single-phase power formats and is, says SISS, “easy and cost-effective to maintain without the need of a rocket scientist!”

    www.inkandsolvents.co.uk

 Screen Printing Supplies

 Screen Printing Supplies UK leading supplier

Screen Printing Supplies uk

Screen Printing Supplies uk. We are the market-leading supplier of high opacity plastisol inks in the UK.

Our plastisol white inks gives the screen printers of any size the widest range of options to print on any substrate.

Choose from a wide range of White inks ‘

designed to meet your exacting demands for specific substrates or that can work across many different substrates.

Our specialty Inks comprise a wide range of bases, barrier products, 4C process, and numerous special effect products.

Cheap  Screen Printing Supplies uk. offers a wide palette of ready to use plastisol color inks in stock and available readily.

Union Colors come in four different series.

 Screen Printing Supplies uk

Furthermore special viscosity modifiers and additives were formulated to work with Union screen print inks.

Mixing systems  allow the textile screen printer to adjust our inks to meet specific application needs.

Furthermore our colour mixing systems are known in the market.

 Screen Printing Supplies uk

PADE – Maxopake plastisol with high opacity used for direct printing.

PATE – Athletic Gloss plastisol ink for Nylon athletic uniforms.

PLUE – Ultrasoft Plastisol that is versatile, for easy direct printing and for transfers.

ATHP – Polyester Low Bleed Plastisol with high Opacity for 100% Polyester athletic uniforms.

Plastisol inks are widely used in garment printing.

They are easy to print, do not dry in the screen, can be very opaque on dark garments, and will adhere to most textiles.

They are composed primarily of two ingredients, PVC resin (a white powder) and plasticizer (a thick, clear liquid).

Plastisol inks have one outstanding characteristic, they must be heated to dry.

They will not dry, or cure, at normal temperatures.

For a complete cure, they must reach 143-166º C.

Plastisol inks can be printed on virtually any surface that can withstand the heat required to cure.

The ink and is porous enough to permit good ink penetration.

Plastisol inks do not color the fibers like a dye. Instead the ink wraps around the fibers and makes a mechanical bond with the fabric.

For this reason, they will not adhere to non-porous substrates such as plastic, metal, and glass.

They also will not adhere well to woven, waterproofed nylon material without adding a bonding agent.

 Screen Printing Supplies uk

Plastisol inks are innocuous when used with reasonable care.

A true plastisol ink contains no air-polluting solvents or volatile organic compounds.

The manufacture, transportation, storage, use, and disposal of plastisol inks do not cause  environmental contamination ,

As long as the appropriate safety and environmental protection procedures are followed.

Cheap Screen Printing Essentials

Mesh Selection

With over 400 different meshes to choose from, selecting the correct mesh can be a frustrating process.

Use the following information as a general guideline for mesh selection.

  • Use 12 threads per centimeter for printing glitter inks.
  •  24 threads per centimeter for athletic printing, opaque ink deposits, thick puff ink, and shimmer ink.
  • 34 threads per centimeter for heavy coverage on dark shirts, solid underbase prints, puff, metallic, and shimmer inks, and transfer printing.
  • 4 9 threads per centimeter for general printing on dark shirts, underbase prints with detail, prints on dark nylon jackets, and silver shimmer ink.
  • 71 threads per centimeter for multi-color printing on light shirts, light colored nylon jackets.
  • 90 threads per centimeter for detailed multi-color printing on light shirts, light nylon jackets, over printing on dark shirts.
  • 120 threads per centimeter for process color on light shirts, overprinting on dark shirts.

When printing fleece goods use 20 threads lower. When printing with an automatic press use 30 threads higher.

This information was developed by Scott Fresener of the US Screen Printing Institute.

Emulsion Selection
For plastisol inks use solvent-resistant dual-cure or diazo direct emulsion stencils specifically designed for plastisols .

Capillary film stencils are also a good choice, particularly when printing halftones and transfers.

Plastisol  Additives

A word of caution about ink additives.

It’s easy to upset the chemical balance of plastisol inks by using the wrong additives or by adding too much of the correct additive.

The result can be a print that never cures properly, a problem that may not be discovered until your customer washes a shirt and the design falls off.

To avoid this problem use only those additives recommended by Union Ink, read the Technical Data Sheets for each ink and additive, and carefully follow their instructions.

Never add mineral spirits to plastisol ink.

Although mineral spirits will make it easier to print at first, soon the ink will become even stiffer and harder to print than before.

Also, it is possible that mineral spirits will prevent the ink from curing properly.

screen print supplies uk.

Store plastisol inks at room temperature. Prolonged exposure to temperatures above 90º F (32º C) can cause the ink to start to cure while it’s still in the container.

Screen Washup
Clean plastisol ink off your screens with either mineral spirits or any of the various brand name screen washes available from your screen printing supplier.

Controlling Dye Migration
Dye migration is the problem caused by dyes in polyester fibers transferring to and changing the color of plastisol inks.

The colors most likely to migrate are red, maroon, kelly green, and some of the darker blues.

Dye migration may appear immediately after the ink is cured, or hours, days, or up to two weeks later.

To control dye migration use the following procedures:

  • Print with high-opacity, low-bleed inks.
  • Use no more heat than necessary to cure the ink. More heat means more dye migration.
  • Print and flash-cure a low-bleed white underbase, then print the desired color over that.
  • Avoid the problem by printing on 100% cotton fabrics.

Print Washability
The washability of properly cured direct and transfer prints is excellent. Dry cleaning is not recommended. Do not iron the printed part of the garment.

 Screen Printing Supplies UK

Curing Plastisol 

Curing plastisol inks is a matter of exposing them to the proper amount of heat for the correct length of time.

Correct curing of plastisol ink is extremely important.

The most common problem encountered with plastisol inks is poor washability.

In almost every case, this is due to incomplete ink cure.

When plastisol is heated, the resin particles absorb the surrounding liquid plasticizer .

swell, merge with each other and form a tough, elastic film.

It is generally impossible to overcure direct prints because the overcure temperature is above the scorching point of the garment.

However, it is not recommended that you heat the ink layer above 350º F (176º C).

Above this temperature puff inks fall like a cake .

When you slam the oven door, and problems with dye migration are greatly increased.

If the entire thickness of the ink is not brought to the correct curing temperature the ink will be under-cured .

The resin has not absorbed all of the plasticizer and the ink will crack and flake off the garment when washed.

 Screen Printing Supplies uk

Temperature

Plastisol will start to become dry to the touch or gelled (also called semi-cured) between 82-121º C.

It becomes fully cured between 138-160º C, depending on the type of plastisol.

The temperature at which the ink becomes fully cured is called the fusion temperature.

Most Union Ink plastisol inks cure at 149º C.

Check the Technical Data Sheet for each Union Ink plastisol for complete instructions.

Measuring Ink Temperature
Temperature test strips are useful for determining temperatures of the printed ink film.

For thick prints, a temperature tape should be placed inside the garment to make sure the proper temperature is achieved at the bottom of the ink film.

Temperature probes and infrared thermometers (pyrometers) can also be used.

Although they are extremely precise at measuring temperature.

Hence may give erroneous ink film temperature readings if not used correctly because the probe may not react quickly enough to changes in the ink film temperature.

 Screen Printing Supplies UK

Time
Once the entire ink film thickness reaches the proper temperature, the ink is fully cured.

This means that with a high enough temperature in the curing unit, the plastisol could actually be cured in a few seconds.

Testing a Direct Print for Cure
The definitive test to determine if plastisol inks are cured is a wash test.

Generally it will take from 5-10 washings to fully test the cure, but if the ink is seriously undercured, the print will show deterioration after only 1-3 washings.

There are two other tests commonly used to check ink cure.

The most popular test is to stretch the print about 2/3 of the total stretch of the T-shirt.

If the print cracks badly and does not retract when the fabric is released, the ink is probably under-cured.

The stretch test does not always work on thick deposits of ink,

Such as with on athletic jerseys, where the top layer of ink may stretch but the ink deep down in the fabric may be under-cured.

Another test for curing can be done by placing a few drops of ethyl acetate onto the back of the ink on the inside of the garment.

This spot of ink is then placed onto an area of unprinted garment and burnished or held tightly together for two minutes.

If there is a transfer of ink to the unprinted area, the ink is not fully cured and the garment should be run through the dryer again.

Like the stretch test, this test is not always accurate. Ethyl acetate is a fairly hazardous chemical.

If the ink is undercured, you can run it through the dryer again and complete the cure.

 Screen Printing Supplies uk

Adjusting Your Dryer

It’s very important to understand how to adjust your dryer to achieve the correct curing temperature.

It is a common misconception that you need to measure the temperature of the dryer.

Actually, you must be able to determine the temperature of the ink film.

The temperature of the ink film is determined by the time the garment is under the heater and the temperature of the heater.

This means that the temperature can be controlled with the belt speed of a conveyor dryer or time under the heater with a flash curing unit.

If the heater temperature in a dryer or flash curing unit reaches 427º C.

It is possible for the ink film on the garment to reach the full cure temperature  149º C in a matter of 20-30 seconds.

Generally the temperature in the dryer is much higher than the temperature required to cure the ink. This allows the ink to cure quicker for faster printing.

Cheap Screen Printing Supplies UK

Flash Curing
Plastisol can generally be fully cured with a flash cure unit if the heater is set to the highest temperature and the unit is placed 2-3 inches (5-7.6 cm) over the garment for 20-30 seconds.

For curing between colors where only a partial cure is required, the time can be less.

Conveyor Curing
As a starting point, the temperature of heaters should be set at full on.

If the heaters are allowed to cycle on and off there may be too long an off cycle for the dryer to maintain the proper temperature consistently.

The belt speed should be set so the garments are in the tunnel 20-30 seconds. Small dryers may require a much slower belt speed than larger dryers.

From this starting point, you will have to print sample garments and wash test them to determine the correct belt speed and temperature settings for your dryer for the various types of jobs you print.

Important Curing Tips

  • White ink requires the longest cure time of any standard color. Light ink colors require longer curing periods than dark colors.
  • Thick ink layers require longer curing periods than thin layers.
  • Glitter, shimmer, reflectivem, and metallic inks require longer curing periods.
  • Because the pigments used in these inks tend to reflect infrared radiation (heat).
  • Prints (both on paper and garments) should be cured within a minute of printing.
  • If you delay curing, the plasticizer in the ink may start to leach out of the ink into the substrate.
  • This will look like an oily margin around the print.
  • Temperature tapes are not exact.
  • They can vary as much as 10-20º F (5-10º C) and should be used only as a guide.
  • The definitive test is how well the print launders.
  • Dryer temperatures can vary greatly with just minor changes in belt speed, garment loading, room temperature, air movement, or fluctuations in incoming voltage.

 Screen Printing Supplies uk

Plastisol Transfer Printing
Most plastisol heat transfers fall into one of three categories, hot-split, cold-peel, or puff.

When hot-split transfers are applied, the paper is stripped off the garment immediately after the heat transfer press is opened.

The ink layer splits, leaving part of the ink on the garment and part on the transfer paper.

Hot-split transfers are nearly indistinguishable from a soft-hand direct print.

When cold-peel transfers are applied, the transfer is allowed to cool before the paper is removed.

All of the ink transfers from the paper to the garment.

Cold-peel transfers have a glossy surface and are preferred for glitter and athletic transfers

. Some transfers can be either hot-split or cold-peel.

Puff transfers are printed with special puff transfer inks and when properly applied, produce a puff design.

Transfers that have been properly printed and applied are as durable as a direct print.

 Screen Printing Supplies UK

Curing Transfer Prints
When printing heat transfers, the ink is only gelled or brought to a semi-cure.

This occurs between82-121º C, just past the wet state.

Transfers that have been semi-cured become fully cured when they are applied to the garment.

If they are over-cured, the ink will not transfer well.

Testing for Cure
To determine the correct dryer settings for gelling the

Increase the conveyor speed, or decrease the temperature of the curing unit until the stacked prints begin to stick together or show a slight amount of set-off on the back of the upper sheet.

Then decrease the conveyor speed enough to eliminate the sticking.

Another test for gel (though not always accurate) is to peel the ink off the release paper and roll it into a ball.

If the ball unrolls when laid down, the transfer is overcured.

A third test is the stretch test.

The gelled ink layer should be cured just enough that you can peel it off the paper, but if you try to stretch it, it should break with very little stretch.

 Screen Printing Supplies uk

Hot-Split Transfer Tips
For medium-opacity transfers use Ultrasoft (PLUS), or AutoLine (AUTO) ink.

For high-opacity transfers use Mix-Opake (MIXO) with Mixo-Trans Additive or Transopake (TROP).

Print through an 86 thread/inch (34 thread/cm) mesh.

Cure to 121º C.

See below for curing procedures.

Use Super-Trans, TransLith, or Trans 55 paper, available from Union Ink.

Transfer to the garment at 177º C for 10-15 seconds at 1.75-2.1 kgf/cm2.

Peel the paper off the garment immediately after the press is opened.

Cheap Screen Printing Essentials

Cold-Peel Transfer Tips
Use the same inks, mesh, and curing procedures as for hot-split transfers.

Use TransFrench T-75, Super-Trans, or TransLith paper, available from Union Ink.

Transfer to the garment at 177º C for 10-20 seconds at 1.75-2.1 kgf/cm2.

Allow the transfer to cool completely before stripping off the paper.

Glitter Transfer Tips
For glitter transfers, use Super Glitter (PAGL-S) printed through a 30 thread/inch (12 thread/cm) mesh.

Cure as for hot-split transfers.

You can use TransFrench T-75 or TransLith papers, but for the highest gloss transfers, use a high-gloss transfer paper such as Warren O Duplex paper.

Glitter transfers are generally applied using the cold-peel procedure.

 Screen Printing Supplies uk

Puff Transfer Tips
For puff transfers, use Transpuff (TRPF) ink printed through a 60 thread/inch (25 thread/cm) mesh.

Print a very thick layer of ink onto Trans-55 paper.

After printing the transfer, apply a transfer adhesive powder.

such as Union’s Unilon Heat Transfer Powder (ULON), either by sprinkling the powder over the print, or by passing the transfer through a tray containing the transfer adhesive powder.

Curing puff transfers is very critical.

The ink should be cured enough that it does not smear or offset in the stack, but not enough to puff.

The temperature window for curing puff transfers is 82-93º C. pply the transfer at 190º C for 5-10 seconds at 2.1-2.8 kgf/cm2).

Remove the paper from the garment immediately after opening the transfer press.

 Screen Printing Supplies uk

Testing for Transferability
It is essential that you test your heat transfers for transferability at the start of each production run.

his is particularly important when using a new paper or ink.

You should also do accelerated aging tests which will indicate how well the transfer will release after 6-12 months on the shelf.

Accelerated aging tests can be done by placing the printed transfer in an environment of(49º C for 100 hours.

This will simulate approximately one year of shelf storage. While this test does not exactly duplicate the effects of aging, it will definitely help you determine whether a particular transfer will release well after aging.

 Screen Printing Supplies uk

Always Test Inks Before Using In Production
Always test inks to determine their fitness for your particular applications, particularly new types of inks and when printing on new products.

Before printing a production run, print a sample for testing for adhesion, crocking, opacity, washability and any specific job requirements.

Screen Printing Supplies kent

Screen Printing Products   focus on promoting.Our high quality bare and meshed aluminum frames.

Silk Screen printing equipment in the UK market at competitive pricing.

Our Advantages that will benefit to clients.

Full series of screen printing supplies such as fabric mesh, squeegee, emulsion, inkjet films, washout booth.

Factory located in KENT UK which is the leading company of screen printing kits with more than 40 years’ experience.

Not only successful in Screen Printing products but also great in SMT frames with foils.

Our Advantages that will benefit to clients:

Full series of screen printing supplies uk such as fabric mesh, squeegee, emulsion, inkjet films, washout booth.

Your Position:

Washout Booth  creen Printing Film    Screen Coating Machine

Mechanical Stretching Machine 1 Color Screen Press Inkjet Transparency Film   Screen Printing Plate

 

Tension Gauge (TETKO Mat 7-50N   Epoxy AB glue   Scoop Coater

Our Ink spatulas have natural wood handles, Stainless steel rivets and stainless steel blade.

The semi-flexible ink spatulas are easier to use.

Ink Spatulas are a key tool for overall profitability by keeping your ink distribution clean, easy, and fast.

Our semi-flexible blade is preferred by screen printers for stirring and mixing colours.

Therefore flexibility allows for easy ink application on the screen making specific quantities a lot easier to manage.

 Screen Printing Supplies uk Applications:

  • The pallet is adjustable; It can be adjusted from forward to backward, from left to right.
    •  It is overprintable which is especially suitable for printing onto T-shirt, pillowcase, bag, non-woven bags and so on.
    •  Special design of spring devices in screen adjusting up and down makes it easier for the user operations according to the sizes and weight of the screen, which guarantees proper spring intensity to avoid squeegees expelling and inks splashing in higher intensity and screen unfixing because of higher weight of screen frames and squeegees in loose intensity.
    •  Screen clamp can be moved up and down, which is suitable for screen frame within 1.8” (4.5cm) thickness.

1 colour screen printing press  adopts full metal structure with parts of stainless steel materials, which is in advanced electrostatic spraying, elegant appearance, convenient in cleaning and not rust. It is especially suitable for single color T-shirt printing. Composite structure & excellent packaging for convenient transportation.

Equipped with manual instruction and full set tools

The Screen Printing  supplies uk method.

The term refers to a method of pushing paint through a screen made of a fine mesh, prepared so that some of the mesh doesn’t let paint through, to create a design.

It is also known as silkscreen, silk-screening and serigraph referring to the original material that printing screens were made of and the ability to create a series of prints.

Substrate

Substrate it the surface that is being printed. Substrates are varied, with the most common ones being fabric and paper.

Screen printers will refer to their screens as having a substrate and a squeegee side, respectively the side where the screen touches the substrate and the side where the ink is pushed through with a squeegee.

Squeegee:

A squeegee is similar to a wiper, used to squeeze ink through the mesh of the treated screen onto the substrate.

Squeegee blades can be hard or soft and can have square, rounded or pointed blade edges for the use on different substrates.

Durometer is the number indicating the hardness of the squeegee blade.

While higher the number the harder it is with 70 being the most common durometer.

Soft round squeegees are more often used for fabrics. While hard sharp edged and square squeegees do well on non-porous surfaces.

Screen Mesh Prints:

Screen Printing Products .

The screen mesh is the polyester used in screen printing for the screen.

It comes in a thread count of 15t to 200t. The higher the thread count, the less ink it will let through.

Screen mesh comes in either white or yellow.

When exposing a positive onto mesh the colour can make the difference between soft and sharp images.

White mesh reflects the light of the exposure to all sides and so creates softer lines while the coloured mesh with less reflection produces a sharper image.

Screen Printing Frame: Screen Printing Products

Last, but definitely not least, is the screen printing frame which holds the screen mesh.

They’re made from wood or aluminum.

Wooden frames don’t last anywhere near as long as aluminum frames which cost a great deal more.

Frames are often pre-tensioned

But re-tensionable frames with rolling bars that can tightened the mesh up to the tension required are also available.

Glass screen printing refers to take the glass pane or glass containers as the main products to use the screen printing mode.

All over the world glass plays a very important role in our daily life even in the modern nowadays.

As architectural decoration material, glass has the advantages of flat and transparent, can shelter from wind and rain, easy to scrub, etc.

screen printed glass  Screen Printing Products

Post-screen printed glass is more favorably welcomed by people used in interior or outdoor design and decoration.

Nowadays, glass containers have begun to apply to medical supplies, industrial products, and the high quality of glass products.

All decorated by screen printing technology will become the new growth point of glass printing.

Screen Printing Supplies.uk are United kingdoms number one supplier of screen printing aluminum frame.

Silk Screen printing meshed frame.

Pre-stretched frame, Screen printing aluminum frame.

Finally Our Customers can buy our products in our webstore. sell online for free

Screen Printing Supplies uk

As a leading supplier within the screen print sector, we endeavor to fulfill complete customer satisfaction at all times.

 

 

 

Screen Printing Mesh

Screen Printing Mesh ink machinery and more

Screen Printing Supplies

Information about frame type.Screen Printing Mesh

Screen Printing Mesh is used on high quality aluminum pre-stretched screens in various sizes and mesh counts.

All aluminum frames are extruded with the highest grade aluminum and cut and welded right here in the uk.

Once welded, the frames are then sandblasted to insure mesh bonds properly to the aluminum.

Whilst they retain its tension through thousands of imprints.

Screens are stretched pneumatically to industry standard tensions.

While using high grade monofilament poly mesh and held using cyanoacrylate glue.

More about aluminum frames.

The advantage of an aluminum screen printing frame is the durability and longevity it retains.

Unlike wood silk screen printing frames, when exposing frames to water in a dip tank or washout sink .

Aluminum frames will not warp.

This will insure a flat frame through thousands of prints to come.

Aluminum frames can also be stretched and re-stretched many times.

The mesh and glue are simply removed from the frame using a professional tool that doesn’t damage the aluminum.

Once cleaned, the frames can then be re-stretched which will give you the ability to use that frame for years of hard work in your shop.

Aluminum frames are also light weight which makes shipping less expensive and saves you money in the long run.

If you’re looking to maximize performance in your shop, aluminum frames are a great item to add to your screen printing equipment.

More about screen printing mesh size:

Different mesh sizes are used for different applications in the screen printing process.

Mesh size is measured by how many threads of mesh there are crossing per square inch.

For instance, a 110 mesh screen has 110 threads crossing per square inch.

The higher the mesh count, the finer the threads and holes are in the screen.

The size of the mesh has a lot to do with how detailed your image is and how thick the ink you are using is.

If you have an image with extremely high detail, a lower mesh screen wont hold the high detail.

The fine lines or dots in the image will simply fall through the holes in the mesh not giving you a correct representation of what your image should be.

Also if you are using a thinner ink, the ink will also flood through the larger holes and soak onto your shirt or substrate making your image blurry as the ink bleeds.

On the other hand, if you are trying to print a thicker ink (such as white) through to high of a mesh screen, barely any ink will print through the mesh.

You will notice that different companies have different sizes available.

Screen Printing Supplies

If the mesh count is fairly close, such as the difference between 155 vs. 156, 196 vs. 200,

or 81 vs. 86, the difference is so negligible and small that it will not matter in your final results.

Since there are many variables involved in silk screen printing we cant tell you exactly what mesh sizes are used for what applications.

However we can give you a general outline of what sizes to use for certain types of printing.

Your basic and most standard Screen Printing Mesh sizes are 43 and 55.

43t Screen Printing Mesh lays a fairly thick layer of ink down.

Its great for block text letters and larger spot color designs.

Its also a recommended mesh for white flash plates

Because many times you will only have to make one print impression which speeds up production time.

156 mesh also lays down a little thicker layer of screen printing ink

But offers you some higher detail ability in your image due to the finer mesh.

Also if you are printing with a little thinner viscosity colors of inks,

Some general guidelines for Screen Printing Mesh selection.

You may want to use the 55 Screen Printing Mesh so not too much ink is passed through your screen.

Lower Screen Printing Meshh counts like 40-86 are used for shimmer and glitter inks.

These inks have particles in them that will not pass through the typical mesh sizes.

Therefore you need a lower Screen Printing Mesh count with large holes in order for all the particles to pass through properly.

Shimmer plastisol inks have finer particles in them so you could probably use an 86 mesh.

while glitter inks have much larger particles so it would be recommended to use a 40 or 60 mesh screen.

200 and 230 Screen Printing Mesh are used for finer detailed images and thinner inks.

These mesh sizes can hold larger half tone dots but are not recommended for four color process prints or fine detail half tone printing.

Screen Printing Supplies Mesh selection.

Also graphic and solvent based silk screening inks that are much thinner should be used with these aluminium screens

Also if you would like a softer feel to the ink on your shirts you can print through these higher mesh counts .

which will let less ink through the screen giving you a much softer feel on the shirt.

This can get tricky however, many times a duller distressed look is wanted for the artwork but if bright vibrant colors are desired.

Especially white you will have a hard time getting the opacity thick enough using these higher meshes.

120T mesh is used for extremely high detail textile printing and fine halftone four color process and simulated process prints.

Fine half tone dots need high fine detail mesh in order to hold and expose on.

Higher meshes such as 355, 380, and 400 are used mainly for graphic printing with UV inks.

UV inks are extremely thin and many times are used for high detail printing on signs, banners, or CD’s.

Using a higher mesh allows the automatic printers used in UV printing to regulate the amount of ink passed through the screen.

 Screen Printing Supplies Mesh selection.

Exposure Notes:

Different mesh sizes hold different amounts of emulsion, due to how big the holes in the mesh are.

For instance a 110 mesh screen will hold much more emulsion then a 305 mesh screen.

While the difference isn’t extreme, you will have to vary your exposure times slightly for different mesh sizes.

A finer mesh screen that holds less emulsion will expose faster then a lower mesh screen that holds more emulsion.

However, the difference is small so you may have to only vary as slightly as 5-10% in either direction

Depending on mesh size in order to get maximum exposure performance.

Some general guidelines for mesh selection in the uk.

As a leading supplier within the screen print sector, we endeavor to fulfill complete customer satisfaction at all times.
Best screen printing supplies uk.

Best screen printing supplies uk. Marketplace Online

Best screen printing supplies uk . Marketplace Online

Best screen printing supplies uk. Marketplace Online we are the market-leading supplier of high opacity plastisol inks in the UK.

Our plastisol white inks gives the screen printers of any size the widest range of options to print on any substrate.

Choose from a wide range of White inks ‘

designed to meet your exacting demands for specific substrates or that can work across many different substrates.

Our specialty Inks comprise a wide range of bases, barrier products, 4C process, and numerous special effect products.

Cheap  Screen Printing Supplies uk. offers a wide palette of ready to use plastisol color inks in stock and available readily.

Union Colors come in four different series.

SCREEN PRINTING SUPPLIES GB

 Screen Printing Supplies uk

Furthermore special viscosity modifiers and additives were formulated to work with Union screen print inks.

Mixing systems  allow the textile screen printer to adjust our inks to meet specific application needs.

Furthermore our colour mixing systems are known in the market.

 Screen Printing Supplies uk

PADE – Maxopake plastisol with high opacity used for direct printing.

PATE – Athletic Gloss plastisol ink for Nylon athletic uniforms.

PLUE – Ultrasoft Plastisol that is versatile, for easy direct printing and for transfers.

ATHP – Polyester Low Bleed Plastisol with high Opacity for 100% Polyester athletic uniforms.

Plastisol inks are widely used in garment printing.

They are easy to print, do not dry in the screen, can be very opaque on dark garments, and will adhere to most textiles.

They are composed primarily of two ingredients, PVC resin (a white powder) and plasticizer (a thick, clear liquid).

Plastisol inks have one outstanding characteristic, they must be heated to dry.

They will not dry, or cure, at normal temperatures.

For a complete cure, they must reach 143-166º C.

Plastisol inks can be printed on virtually any surface that can withstand the heat required to cure.

The ink and is porous enough to permit good ink penetration.

Plastisol inks do not color the fibers like a dye. Instead the ink wraps around the fibers and makes a mechanical bond with the fabric.

For this reason, they will not adhere to non-porous substrates such as plastic, metal, and glass.

They also will not adhere well to woven, waterproofed nylon material without adding a bonding agent.

SCREEN PRINTING SUPPLIES GB

 Screen Printing Supplies uk

Plastisol inks are innocuous when used with reasonable care.

A true plastisol ink contains no air-polluting solvents or volatile organic compounds.

The manufacture, transportation, storage, use, and disposal of plastisol inks do not cause  environmental contamination ,

As long as the appropriate safety and environmental protection procedures are followed.

Cheap Screen Printing Essentials

Mesh Selection

With over 400 different meshes to choose from, selecting the correct mesh can be a frustrating process.

Use the following information as a general guideline for mesh selection.

  • Use 12 threads per centimeter for printing glitter inks.
  •  24 threads per centimeter for athletic printing, opaque ink deposits, thick puff ink, and shimmer ink.
  • 34 threads per centimeter for heavy coverage on dark shirts, solid underbase prints, puff, metallic, and shimmer inks, and transfer printing.
  • 4 9 threads per centimeter for general printing on dark shirts, underbase prints with detail, prints on dark nylon jackets, and silver shimmer ink.
  • 71 threads per centimeter for multi-color printing on light shirts, light colored nylon jackets.
  • 90 threads per centimeter for detailed multi-color printing on light shirts, light nylon jackets, over printing on dark shirts.
  • 120 threads per centimeter for process color on light shirts, overprinting on dark shirts.

When printing fleece goods use 20 threads lower. When printing with an automatic press use 30 threads higher.

This information was developed by Scott Fresener of the US Screen Printing Institute.

Emulsion Selection
For plastisol inks use solvent-resistant dual-cure or diazo direct emulsion stencils specifically designed for plastisols .

Capillary film stencils are also a good choice, particularly when printing halftones and transfers.

Plastisol  Additives

A word of caution about ink additives.

It’s easy to upset the chemical balance of plastisol inks by using the wrong additives or by adding too much of the correct additive.

The result can be a print that never cures properly, a problem that may not be discovered until your customer washes a shirt and the design falls off.

To avoid this problem use only those additives recommended by Union Ink, read the Technical Data Sheets for each ink and additive, and carefully follow their instructions.

Never add mineral spirits to plastisol ink.

Although mineral spirits will make it easier to print at first, soon the ink will become even stiffer and harder to print than before.

Also, it is possible that mineral spirits will prevent the ink from curing properly.

Cheaper than pyramid

Store plastisol inks at room temperature. Prolonged exposure to temperatures above 90º F (32º C) can cause the ink to start to cure while it’s still in the container.

Screen Washup
Clean plastisol ink off your screens with either mineral spirits or any of the various brand name screen washes available from your screen printing supplier.

Controlling Dye Migration
Dye migration is the problem caused by dyes in polyester fibers transferring to and changing the color of plastisol inks.

The colors most likely to migrate are red, maroon, kelly green, and some of the darker blues.

Dye migration may appear immediately after the ink is cured, or hours, days, or up to two weeks later.

To control dye migration use the following procedures:

  • Print with high-opacity, low-bleed inks.
  • Use no more heat than necessary to cure the ink. More heat means more dye migration.
  • Print and flash-cure a low-bleed white underbase, then print the desired color over that.
  • Avoid the problem by printing on 100% cotton fabrics.

Print Washability
The washability of properly cured direct and transfer prints is excellent. Dry cleaning is not recommended. Do not iron the printed part of the garment.

 Screen Printing Supplies UK

Curing Plastisol 

Curing plastisol inks is a matter of exposing them to the proper amount of heat for the correct length of time.

Correct curing of plastisol ink is extremely important.

The most common problem encountered with plastisol inks is poor washability.

In almost every case, this is due to incomplete ink cure.

When plastisol is heated, the resin particles absorb the surrounding liquid plasticizer .

swell, merge with each other and form a tough, elastic film.

It is generally impossible to overcure direct prints because the overcure temperature is above the scorching point of the garment.

However, it is not recommended that you heat the ink layer above 350º F (176º C).

Above this temperature puff inks fall like a cake .

When you slam the oven door, and problems with dye migration are greatly increased.

If the entire thickness of the ink is not brought to the correct curing temperature the ink will be under-cured .

The resin has not absorbed all of the plasticizer and the ink will crack and flake off the garment when washed.

 Screen Printing Supplies uk

Temperature

Plastisol will start to become dry to the touch or gelled (also called semi-cured) between 82-121º C.

It becomes fully cured between 138-160º C, depending on the type of plastisol.

The temperature at which the ink becomes fully cured is called the fusion temperature.

Most Union Ink plastisol inks cure at 149º C.

Check the Technical Data Sheet for each Union Ink plastisol for complete instructions.

Measuring Ink Temperature
Temperature test strips are useful for determining temperatures of the printed ink film.

For thick prints, a temperature tape should be placed inside the garment to make sure the proper temperature is achieved at the bottom of the ink film.

Temperature probes and infrared thermometers (pyrometers) can also be used.

Although they are extremely precise at measuring temperature.

Hence may give erroneous ink film temperature readings if not used correctly because the probe may not react quickly enough to changes in the ink film temperature.

 Screen Printing Supplies UK

Time
Once the entire ink film thickness reaches the proper temperature, the ink is fully cured.

This means that with a high enough temperature in the curing unit, the plastisol could actually be cured in a few seconds.

Testing a Direct Print for Cure
The definitive test to determine if plastisol inks are cured is a wash test.

Generally it will take from 5-10 washings to fully test the cure, but if the ink is seriously undercured, the print will show deterioration after only 1-3 washings.

There are two other tests commonly used to check ink cure.

The most popular test is to stretch the print about 2/3 of the total stretch of the T-shirt.

If the print cracks badly and does not retract when the fabric is released, the ink is probably under-cured.

The stretch test does not always work on thick deposits of ink,

Such as with on athletic jerseys, where the top layer of ink may stretch but the ink deep down in the fabric may be under-cured.

Another test for curing can be done by placing a few drops of ethyl acetate onto the back of the ink on the inside of the garment.

This spot of ink is then placed onto an area of unprinted garment and burnished or held tightly together for two minutes.

If there is a transfer of ink to the unprinted area, the ink is not fully cured and the garment should be run through the dryer again.

Like the stretch test, this test is not always accurate. Ethyl acetate is a fairly hazardous chemical.

If the ink is undercured, you can run it through the dryer again and complete the cure.

 Screen Printing Supplies uk

Adjusting Your Dryer

It’s very important to understand how to adjust your dryer to achieve the correct curing temperature.

It is a common misconception that you need to measure the temperature of the dryer.

Actually, you must be able to determine the temperature of the ink film.

The temperature of the ink film is determined by the time the garment is under the heater and the temperature of the heater.

This means that the temperature can be controlled with the belt speed of a conveyor dryer or time under the heater with a flash curing unit.

If the heater temperature in a dryer or flash curing unit reaches 427º C.

It is possible for the ink film on the garment to reach the full cure temperature  149º C in a matter of 20-30 seconds.

Generally the temperature in the dryer is much higher than the temperature required to cure the ink. This allows the ink to cure quicker for faster printing.

Cheap Screen Printing Supplies UK

Flash Curing
Plastisol can generally be fully cured with a flash cure unit if the heater is set to the highest temperature and the unit is placed 2-3 inches (5-7.6 cm) over the garment for 20-30 seconds.

For curing between colors where only a partial cure is required, the time can be less.

Conveyor Curing
As a starting point, the temperature of heaters should be set at full on.

If the heaters are allowed to cycle on and off there may be too long an off cycle for the dryer to maintain the proper temperature consistently.

The belt speed should be set so the garments are in the tunnel 20-30 seconds. Small dryers may require a much slower belt speed than larger dryers.

From this starting point, you will have to print sample garments and wash test them to determine the correct belt speed and temperature settings for your dryer for the various types of jobs you print.

Important Curing Tips

  • White ink requires the longest cure time of any standard color. Light ink colors require longer curing periods than dark colors.
  • Thick ink layers require longer curing periods than thin layers.
  • Glitter, shimmer, reflectivem, and metallic inks require longer curing periods.
  • Because the pigments used in these inks tend to reflect infrared radiation (heat).
  • Prints (both on paper and garments) should be cured within a minute of printing.
  • If you delay curing, the plasticizer in the ink may start to leach out of the ink into the substrate.
  • This will look like an oily margin around the print.
  • Temperature tapes are not exact.
  • They can vary as much as 10-20º F (5-10º C) and should be used only as a guide.
  • The definitive test is how well the print launders.
  • Dryer temperatures can vary greatly with just minor changes in belt speed, garment loading, room temperature, air movement, or fluctuations in incoming voltage.

 Screen Printing Supplies uk

Plastisol Transfer Printing
Most plastisol heat transfers fall into one of three categories, hot-split, cold-peel, or puff.

When hot-split transfers are applied, the paper is stripped off the garment immediately after the heat transfer press is opened.

The ink layer splits, leaving part of the ink on the garment and part on the transfer paper.

Hot-split transfers are nearly indistinguishable from a soft-hand direct print.

When cold-peel transfers are applied, the transfer is allowed to cool before the paper is removed.

All of the ink transfers from the paper to the garment.

Cold-peel transfers have a glossy surface and are preferred for glitter and athletic transfers

Also Some transfers can be either hot-split or cold-peel.

Puff transfers are printed with special puff transfer inks and when properly applied, produce a puff design.

Transfers that have been properly printed and applied are as durable as a direct print.

 Screen Printing Supplies UK

Curing Transfer Prints
When printing heat transfers, the ink is only gelled or brought to a semi-cure.

This occurs between82-121º C, just past the wet state.

Transfers that have been semi-cured become fully cured when they are applied to the garment.

If they are over-cured, the ink will not transfer well.

Testing for Cure
To determine the correct dryer settings for gelling the

Increase the conveyor speed, or decrease the temperature of the curing unit until the stacked prints begin to stick together or show a slight amount of set-off on the back of the upper sheet.

Then decrease the conveyor speed enough to eliminate the sticking.

Another test for gel (though not always accurate) is to peel the ink off the release paper and roll it into a ball.

If the ball unrolls when laid down, the transfer is overcured.

A third test is the stretch test.

The gelled ink layer should be cured just enough that you can peel it off the paper, but if you try to stretch it, it should break with very little stretch.

 Screen Printing Supplies uk

Hot-Split Transfer Tips
For medium-opacity transfers use Ultrasoft (PLUS), or AutoLine (AUTO) ink.

For high-opacity transfers use Mix-Opake (MIXO) with Mixo-Trans Additive or Transopake (TROP).

Print through an 86 thread/inch (34 thread/cm) mesh.

Cure to 121º C.

See below for curing procedures.

Use Super-Trans, TransLith, or Trans 55 paper, available from Union Ink.

Transfer to the garment at 177º C for 10-15 seconds at 1.75-2.1 kgf/cm2.

Peel the paper off the garment immediately after the press is opened.

Cheap Screen Printing Essentials

Cold-Peel Transfer Tips
Use the same inks, mesh, and curing procedures as for hot-split transfers.

Use TransFrench T-75, Super-Trans, or TransLith paper, available from Union Ink.

Transfer to the garment at 177º C for 10-20 seconds at 1.75-2.1 kgf/cm2.

Allow the transfer to cool completely before stripping off the paper.

Glitter Transfer Tips
For glitter transfers, use Super Glitter (PAGL-S) printed through a 30 thread/inch (12 thread/cm) mesh.

Cure as for hot-split transfers.

You can use TransFrench T-75 or TransLith papers, but for the highest gloss transfers, use a high-gloss transfer paper such as Warren O Duplex paper.

Glitter transfers are generally applied using the cold-peel procedure.

 Screen Printing Supplies uk

Puff Transfer Tips
For puff transfers, use Transpuff (TRPF) ink printed through a 60 thread/inch (25 thread/cm) mesh.

Print a very thick layer of ink onto Trans-55 paper.

After printing the transfer, apply a transfer adhesive powder.

such as Union’s Unilon Heat Transfer Powder (ULON), either by sprinkling the powder over the print, or by passing the transfer through a tray containing the transfer adhesive powder.

Curing puff transfers is very critical.

The ink should be cured enough that it does not smear or offset in the stack, but not enough to puff.

The temperature window for curing puff transfers is 82-93º C. pply the transfer at 190º C for 5-10 seconds at 2.1-2.8 kgf/cm2).

Remove the paper from the garment immediately after opening the transfer press.

 Screen Printing Supplies uk

Testing for Transferability
It is essential that you test your heat transfers for transferability at the start of each production run.

his is particularly important when using a new paper or ink.

You should also do accelerated aging tests which will indicate how well the transfer will release after 6-12 months on the shelf.

Accelerated aging tests can be done by placing the printed transfer in an environment of(49º C for 100 hours.

This will simulate approximately one year of shelf storage.

While this test does not exactly duplicate the effects of aging, it will definitely help you determine whether a particular transfer will release well after aging.

Best screen printing supplies uk.

Always Test Inks Before Using In Production
Always test inks to determine their fitness for your particular applications, particularly new types of inks and when printing on new products.

Before printing a production run, print a sample for testing for adhesion, crocking, opacity, washability and any specific job requirements.

Screen Printing Supplies kent

Screen Printing Products   focus on promoting.Our high quality bare and meshed aluminum frames.

Silk Screen printing equipment in the UK market at competitive pricing.

Our Advantages that will benefit to clients.

Full series of screen printing supplies such as fabric mesh, squeegee, emulsion, inkjet films, washout booth.

Factory located in KENT UK which is the leading company of screen printing kits with more than 40 years’ experience.

Not only successful in Screen Printing products but also great in SMT frames with foils.

Our Advantages that will benefit to clients:

Full series of screen printing supplies uk such as fabric mesh, squeegee, emulsion, inkjet films, washout booth.

Your Position:

Screen Printing FilmScreen Coating MachineMechanical Stretching Machine1 Color Screen PressInkjet Transparency FilmScreen Printing Plate

Washout Booth  creen Printing Film    Screen Coating Machine

Mechanical Stretching Machine 1 Color Screen Press Inkjet Transparency Film   Screen Printing Plate

 

Tension Gauge (TETKO Mat 7-50N)Epoxy AB glueScoop CoaterStainless Steel Ink Spatula

Tension Gauge (TETKO Mat 7-50N   Epoxy AB glue   Scoop Coater

Our Ink spatulas have natural wood handles, Stainless steel rivets and stainless steel blade.

The semi-flexible ink spatulas are easier to use.

Ink Spatulas are a key tool for overall profitability by keeping your ink distribution clean, easy, and fast.

Our semi-flexible blade is preferred by screen printers for stirring and mixing colours.

Therefore flexibility allows for easy ink application on the screen making specific quantities a lot easier to manage.

 Screen Printing Supplies uk Applications:

•  The pallet is adjustable; It can be adjusted from forward to backward, from left to right.
•  It is overprintable which is especially suitable for printing onto T-shirt, pillowcase, bag, non-woven bags and so on.
•  Special design of spring devices in screen adjusting up and down makes it easier for the user operations according to the sizes and weight of the screen, which guarantees proper spring intensity to avoid squeegees expelling and inks splashing in higher intensity and screen unfixing because of higher weight of screen frames and squeegees in loose intensity.
•  Screen clamp can be moved up and down, which is suitable for screen frame within 1.8” (4.5cm) thickness.

1 colour screen printing press  adopts full metal structure with parts of stainless steel materials, which is in advanced electrostatic spraying, elegant appearance, convenient in cleaning and not rust. It is especially suitable for single color T-shirt printing. Composite structure & excellent packaging for convenient transportation.
Equipped with manual instruction and full set tools

The Screen Printing  supplies uk method.

The term refers to a method of pushing paint through a screen made of a fine mesh, prepared so that some of the mesh doesn’t let paint through, to create a design.

It is also known as silkscreen, silk-screening and serigraph referring to the original material that printing screens were made of and the ability to create a series of prints.

Substrate

Substrate it the surface that is being printed. Substrates are varied, with the most common ones being fabric and paper.

Screen printers will refer to their screens as having a substrate and a squeegee side, respectively the side where the screen touches the substrate and the side where the ink is pushed through with a squeegee.

Squeegee:

A squeegee is similar to a wiper, used to squeeze ink through the mesh of the treated screen onto the substrate.

Squeegee blades can be hard or soft and can have square, rounded or pointed blade edges for the use on different substrates.

Durometer is the number indicating the hardness of the squeegee blade.

While higher the number the harder it is with 70 being the most common durometer.

Soft round squeegees are more often used for fabrics. While hard sharp edged and square squeegees do well on non-porous surfaces.

Screen Mesh Prints:

Screen Printing Products .

The screen mesh is the polyester used in screen printing for the screen.

It comes in a thread count of 15t to 200t. The higher the thread count, the less ink it will let through.

Screen mesh comes in either white or yellow.

When exposing a positive onto mesh the colour can make the difference between soft and sharp images.

White mesh reflects the light of the exposure to all sides and so creates softer lines while the coloured mesh with less reflection produces a sharper image.

Screen Printing Frame: Screen Printing Products

Last, but definitely not least, is the screen printing frame which holds the screen mesh.

They’re made from wood or aluminum.

Wooden frames don’t last anywhere near as long as aluminum frames which cost a great deal more.

Frames are often pre-tensioned

But re-tensionable frames with rolling bars that can tightened the mesh up to the tension required are also available.

Glass screen printing refers to take the glass pane or glass containers as the main products to use the screen printing mode.

All over the world glass plays a very important role in our daily life even in the modern nowadays.

As architectural decoration material, glass has the advantages of flat and transparent, can shelter from wind and rain, easy to scrub, etc.

screen printed glass  Screen Printing Products

Post-screen printed glass is more favorably welcomed by people used in interior or outdoor design and decoration.

Nowadays, glass containers have begun to apply to medical supplies, industrial products, and the high quality of glass products.

All decorated by screen printing technology will become the new growth point of glass printing.

Screen Printing Supplies.uk are United kingdoms number one supplier of screen printing aluminum frame.

Silk Screen printing meshed frame.

Pre-stretched frame, Screen printing aluminum frame.

Finally Our Customers can buy our products in our webstore. sell online for free

 Screen Printing Supplies uk

Therefore As a leading supplier within the screen print sector, we endeavor to fulfill complete customer satisfaction at all times.
Finally

 

ebay bafoon screen printing

screen printing expert lesson ebay

A bit simplistic for our ebay bafoon  or just right, what do you think?

8 Steps for Successful Screen Printing

The ebay bafoon screen printing process of screen printing using mesh stencils made with photosensitive chemical emulsions .

Explained below are with helpful tips for each step.

Which will enable any artist whether novice or expert to achieve success in screen printing.

1. Choose or Create the Artwork to Be Screen Printed

The best way to prepare artwork to be screen printed is to have it copied onto a transparency.

Most copy shops do this for a very small fee.

Original artwork can be painted directly onto a transparency or onto any piece of sturdy, clear plastic.

Beginners should create simple designs with fairly clear, thick lines since screen printing delicate, fine-lined artwork can be tricky.

The objective is to create what artists call a “film positive” of the artwork, which is 100 percent black on a clear background.

Whether it is printed or hand-drawn, the artwork blocks the emulsion on the screen.

Furthermore  the emulsion is washed off the design, allowing the ink to pass through the screen and transfer the design onto the T-shirt or other object that is imprinted.

2.ebay bafoon screen printing  Gather the Materials Needed for Screen Printing

Once the artwork to be screen printed has been selected and prepared, it is time to gather the rest of the necessary materials and equipment.

Object to Be Printed

The screen printing can be done on paper, on canvas, or on just about anything made from fabric.

Find a T-shirt, a tablecloth and napkins, a scarf, a tote bag, or simply a piece of fabric that is framed and hung as art.

The object should be clean and ready to absorb the ink.

Screen Frame

The screen frame is usually made of wood and is very tightly covered with a fine mesh material.

This is the screen through which the ink is transferred onto the object to be printed.

Metal screens are the most durable and stand up to many washings and printings.

Black Paper, Plastic, or Fabric

This flat black object should be large enough on which to place the frame.

It is the surface on which the screen is placed to burn the image onto the screen.

Photosensitive Emulsion and Activator

The sensitizer and emulsion come separately and must be mixed together and applied to the screen.

Users must make sure to mix enough to thoroughly cover the screen.

Screen Printing Ink

Users need to buy enough screen printing ink to transfer the design to the object being printed.

It might be fun to choose several different colors and make several versions of the screen print art.

Squeegee

squeegee is an important tool in screen printing.

It is used to apply and spread the ink through the screen onto the T-shirt or other object.

Squeegees are available in several different sizes, and they are made from a single piece of vinyl or from a comfortable wooden holder with a rubber blade.

3. Prepare the Frame and Screen

Some people make their own mesh screens for printing by taking an old wooden picture frame.

Covering it tightly with an organdy silk screen fabric, or even cut-up old gauzy nylon curtains.

Users should make sure that the fabric is stretched as tight as possible and is secured thoroughly with a staple gun applied all around the frame.

It is important to keep the fabric straight so that the holes in the mesh of the fabric allow the ink to pass through it evenly.

A commercially prepared screen that has already been used should be prepared for printing by washing it thoroughly with a mild abrasive to ensure that none of the holes are clogged with dirt, grease, or previously used ink.

The screen should also be allowed to dry thoroughly.

4. Spread the Photo Emulsion onto the Screen

First, users should mix the sensitizer and the emulsion thoroughly according to the directions on the containers.

The emulsions are light-sensitive liquid chemicals that are applied to the screen, and they become more sensitive as they dry.

The side of the screen that comes in contact with the object to be printed is known as the substrate side.

Whilste the side where the ink is placed and pushed through the screen is called the “inkwell” side.

Both sides need to be covered with the emulsion mixture, and it is best to begin on the substrate side.

Some people prefer to place the screen on top of a piece of black fabric or plastic.

Users should pour some emulsion on the screen and spread it thinly and evenly.

Makingaking sure that all of the holes are covered.

Next, users should place the screen in a dark place to dry (a closet works well).

Some people like to point a fan at the screen to help it dry faster.

Users need to make sure that the emulsion on the screen has dried completely.

Sometimes this can take as little as a couple of hours or as long as overnight.

5. Burn the Image onto the Screen

The next steps are to attach the artwork to the screen and expose it all to light.

in order to burn the image onto the screen, so that the ink can pass through the screen and be transferred to the object being printed.

Attaching the Artwork

Once the emulsion on the screen is completely dry.

Bafoons should lay it down on top of a clean piece of black cloth or sturdy paper,

With the substrate side facing down and the inkwell side facing up.

They should then lay the template with the design on it down on the inkwell side of the screen and attach it with tape.

Alternatively, they could also lay a piece of clean glass on top of the artwork,

While making sure that the glass is bigger than the design while still fitting inside the frame.

If the emulsion being used is highly photosensitive, it may be best to do this step in a fairly dark room.

So that the emulsion does not begin to react to the light until the artwork is securely in place.

ebay bafoon screen printing  Exposing the Screen to Light

Next, they should place a lamp with a 200- or 250-watt bulb about a foot or two above the screen.

Professional screen printing lamps are also available for purchase,

While some people like to take the frame with the artwork attached outdoors so that the UV rays of the sun burn the image.

With the exposure to light, the emulsion hardens, and the area of the screen that is covered by the design does not harden.

Usually 10 to 15 minutes is enough time for this process to be complete.

6. ebay bafoon screen printing . Rinse the Screen

Once the photosensitive emulsion has hardened, users should remove the artwork and rinse the screen under very cold water.

This can be done in a sink, in a shower or tub, or outdoors with a garden hose.

The emulsion that was under the design flakes off.

It may be necessary to gently rub the area where the emulsion is being removed, using a hand or the scratchy side of a kitchen sponge.

Once the screen is thoroughly rinsed, the design should be visible as a see-through part of the screen, like a stencil made out of mesh.

7. ebay bafoon screen printing

For the printing stage, it is a good idea to put masking tape or painter’s tape along the edges of the screen to prevent any sloppy leaks.

Users should place the fabric or object to be printed down on some newspapers to protect the surface underneath.

It is important to work on a flat surface so that the image is not distorted.

If it is a T-shirt that is being printed,

Users can place some layers of paper or cardboard inside the shirt.

To prevent the ink from leaking through to the other side of the shirt.

When users are ready to begin the printing process.

They can lay the screen down with the substrate side touching the fabric to be printed.

Next, they can pour a small amount of ink horizontally across the top of the screen

Using a squeegee to pull the ink down across the image, pressing the ink through the screen onto the fabric underneath.

They can then move the squeegee up and down and back and forth .

To ensure that the ink is pressed through the screen thoroughly and evenly.

The screen should be held in place, or else the image may not come through crisply.

At this point, the artwork should be in printed form.

8. ebay bafoon screen printing Cure and Clean Up.

Some screen printing ink manufacturers recommend “curing.”

Which is placing the printed object in an oven preheated to 400 degrees F for just about 30 seconds.

Other ink makers recommend ironing the back of the printed fabric to help set the ink.

ebay bafoons should be sure to follow the manufacturer’s recommendations on the ink being used.

 

Finding and Buying ebay bafoon screen printing.   Materials and Equipment on eBay

Although there are plenty of  Better quality art supply stores that sell the materials and equipment needed for screen printing.,

The largest selection, best prices, and easiest purchasing can be found on eBay..Yeah right!!!!

Searching for ebay bafoon screen printing Materials and Equipment on eBay

The easiest way to find the right screen printing materials and equipment on eBay is to go to the homepage,.

Type a few words into the search bar, and click Search.

For example, if you are looking for “screen printing emulsions,,” simply enter that phrase.

Although this takes you to a page with a variety of emulsions for screen printing.

Furtherm0re follow the same procedure to search for screen printing mesh frames or screen printing squeegees..

Finally you may want to look for screen printing kits that contain everything needed to begin screen printing, or a screen printing press for commercial use.

first of all, also, another, furthermore,

because, so, due to, for the reason that

similarly, likewise, rather, while, in contrast

as a result, hence, consequently, therefore

Above all, most noteworthy, certainly, even more

as a result, hence, consequently, therefore

Finally for the reason that our customers can buy our products from our webstore.

Consequently if any of this makes any sense . Please let us know!!!.